Digital Controls (AD Series): The best performance and protection to the phase converter start circuit and idler/generator, and they allow for increased torque that can be required for extreme starting loads while maintaining precise voltage balancing. If the AR series is like a carbureted engine, the AD series is fuel injected more powerful, reliable, and precise. Runs w/fully programmable MicroSmart controller

ADX Series: In addition to the AD, the ADX series adds nitrous 250 percent more starting power, for compressors, pumps, flywheel loads, etc. w/fully programmable MicroSmart controller. ADX models have current control to provide consistent torque while starting high inertia, extremely hard starting loads, yet are precise enough for CNC applications.

3HP Rotary Phase Converter AB03-S (INCLUDES STARTER)

Features

• Most Economical units
• Built-in Starters
• +/- 5 Percent Voltage

Specifications

• Cost to Operate: $ .01/hr
• Starts/Runs Easy Loads up to 3HP such as drills, chop saws, bench grinders, wheel balancers, etc.
• Starts/Runs Medium Loads up to 2HP such as larger chops saws, drills, presses, mills, mixers, etc.
• Starts/Runs Large Loads up to 1.5HP such as lathes, sanders, pizza/bagel dough mixers, etc.
• Largest HP motor to start: 2.5HP
• Maximum total HP to run (non CNC): 4.5HP, 13 amps
• Maximum total HP to run (CNC): 1.5HP, 4 amps

Idler Generator

• Designed and engineered for phase conversion
• Achieve optimum voltage and current balance throughout the full load of the converter
• Awarded a Soft Start rating by drastically reducing inrush current upon startup.
• Run cool, quietly, and efficiently at synchronous speed indefinitely.
• Manufactured in the USA by Baldor Electric

Control Panel

• Push-Button ON/OFF Switch w/ PowerGuard Protection
• Heavy Duty Performance, 100 percent Power
• Powder-Coated Steel Enclosure
• Integrated protection in case of power interruption
• Removable sides for easy access to wiring
• Stress-free component mounts prevent leakage
• Oil-Filled capacitors with raised voltage ratings optimized for the demands of phase conversion.
• Copper windings with ISR magnet wire
• Best Warranty in the Industry

Now that you have determined that the 3 HP rotary phase converter is the correct size for your application, American Rotary has some exclusive choices for you - ones that you cannot find anywhere else.  

Digital Controls (AD Series): The best performance and protection to the phase converter start circuit and idler/generator, and they allow for increased torque that can be required for extreme starting loads while maintaining precise voltage balancing. If the AR series is like a carbureted engine, the AD series is fuel injected…more powerful, reliable, and precise. Runs w/fully programmable MicroSmart controller

ADX Series: In addition to the AD, the ADX series adds nitrous… 250 percent more starting power, for compressors, pumps, flywheel loads, etc. w/fully programmable MicroSmart controller. ADX models have current control to provide consistent torque while starting high inertia, extremely hard starting loads, yet are precise enough for CNC applications.

3HP Rotary Phase Converter CNC-PRO (INCLUDES STARTER and DIGITAL BOARD (CNC))

Features

• All features of Classic Series PLUS
•  +/- 5 percent Voltage Balance
• Wider range of field modifications possible
• Digital Board aids in the protection of the start circuit
• Best Precision on starting the unit

Specifications

• Cost to Operate: $ .01/hr
• Starts/Runs Easy Loads up to 3HP such as drills, chop saws, bench grinders, wheel balancers, etc.
• Starts/Runs Medium Loads up to 2HP such as larger chops saws, drills, presses, mills, mixers, etc.
• Starts/Runs Large Loads up to 1.5HP such as lathes, sanders, pizza/bagel dough mixers, etc.
• Largest HP motor to start: 2.5HP
• Maximum total HP to run (non CNC): 4.5HP, 13 amps
• Maximum total HP to run (CNC): 1.5HP, 4 amps

Idler Generator

• Designed and engineered for phase conversion
• Achieve optimum voltage and current balance throughout the full load of the converter
• Awarded a Soft Start rating by drastically reducing inrush current upon startup.
• Run cool, quietly, and efficiently at synchronous speed indefinitely.
• Manufactured in the USA by Baldor Electric

Control Panel

• Push-Button ON/OFF Switch w/ PowerGuard Protection
• Heavy Duty Performance, 100 percent Power
• Powder-Coated Steel Enclosure
• Integrated protection in case of power interruption
• Removable sides for easy access to wiring
• Stress-free component mounts prevent leakage
• Oil-Filled capacitors with raised voltage ratings optimized for the demands of phase conversion.
• Copper windings with ISR magnet wire
• Best Warranty in the Industry

Now that you have determined that the 3 HP rotary phase converter is the correct size for your application, American Rotary has some exclusive choices for you - ones that you cannot find anywhere else.  

Digital Controls (AD Series): The best performance and protection to the phase converter start circuit and idler/generator, and they allow for increased torque that can be required for extreme starting loads while maintaining precise voltage balancing. If the AR series is like a carbureted engine, the AD series is fuel injected…more powerful, reliable, and precise. Runs w/fully programmable MicroSmart controller

ADX Series: In addition to the AD, the ADX series adds nitrous… 250 percent more starting power, for compressors, pumps, flywheel loads, etc. w/fully programmable MicroSmart controller. ADX models have current control to provide consistent torque while starting high inertia, extremely hard starting loads, yet are precise enough for CNC applications.

3HP Rotary Phase Converter Gentic Digital/CNC Controler INCLUDES STARTER and
FULL DIGITAL BOARD (CNC)

Features

• Best Features of American Rotary-CNC Pro Series PLUS
• Built in Heavy Load Voltage Stabilizer
• Two Button Start Circuit
• Mounting Feet Included
• Automatic Controls
• All non-electrolytic capacitors provide the most stable environment
• Single PhaseIndicator Light

Specifications

• Cost to Operate: $ .01/hr
• Starts/Runs Easy Loads up to 3HP such as drills, chop saws, bench grinders, wheel balancers, etc.
• Starts/Runs Medium Loads up to 2HP such as larger chops saws, drills, presses, mills, mixers, etc.
• Starts/Runs Large Loads up to 1.5HP such as lathes, sanders, pizza/bagel dough mixers, etc.
• Largest HP motor to start: 2.5HP
• Maximum total HP to run (non CNC): 4.5HP, 13 amps
• Maximum total HP to run (CNC): 1.5HP, 4 amps

Idler Generator

• Designed and engineered for phase conversion
• Achieve optimum voltage and current balance throughout the full load of the converter
• Awarded a Soft Start rating by drastically reducing inrush current upon startup.
• Run cool, quietly, and efficiently at synchronous speed indefinitely.
• Manufactured in the USA by Baldor Electric

Control Panel

• Push-Button ON/OFF Switch w/ PowerGuard Protection
• Heavy Duty Performance, 100 percent Power
• Powder-Coated Steel Enclosure
• Integrated protection in case of power interruption
• Removable sides for easy access to wiring
• Stress-free component mounts prevent leakage
• Oil-Filled capacitors with raised voltage ratings optimized for the demands of phase conversion.
• Copper windings with ISR magnet wire
• Best Warranty in the Industry