Baileigh H Frame Hydraulic Shop Presses

Hydraulic Press HSP-66M-HD

Weighing in at just over 1750 pounds, this motorized H-frame press is built to last. Its welded .375 inch plate steel structure can handle all the hydraulic system’s force without flexing.

Features:

• 66 tons of hydraulic force.
• 40.94 inch working width.
• 9.85 inch cylinder stroke.
• Runs on 220 volt 3-phase power.
• Robust 5.3 hp motor runs on has 2 working speeds: rapid descent and slow approach.
• Hand pump gives you the option for even finer control.
• Cylinder moves left or right within the framework to deliver pressure on off-center parts.
• 7.08 inch-diameter cylinder automatically returns to the toponce the job is done.
• 53.34 inch table fabricated to exacting tolerances.
• Table features 2 support pins that are 2 inch in diameter, letting you lock the table in at the correct working height.
• Lifting chainshelp with the placement of the table and save you muscle strain.
• Includes pressure regulator and ram cap.
• Baileigh covers this hydraulic shop press with a 1-year parts warranty as well as lifetime technical support by phone.

Hydraulic H-Frame Press HSP-110M-HD

With a 1 inch plate steel framework and plenty of time-saving features, this hydraulic press sets the standard by which all other models should be measured.

• 110-ton capacity.
• 42.12 inch working width.
• 8.66 inch diameter cylinder with 11.8 inch stroke.
• Runs on 220-volt 3-phase power.
• 7.5 hp motor can push all 110 tons of force without strain.
• cylinder moves left or right within the framework so you can apply force for off-center projects.
• 2-speed down movement (rapid or slow descent) with pressure regulator.
• 6.3 inch chrome piston automatically returns to top position after the job is done.
• Welded steel construction maintains accuracy, holding up under the machines full force without flexing.
• Baileigh backs this hydraulic shop press with a 1-year parts warranty.
• Our experienced team of reps will also provide lifetime technical support by phone.

Recommended for: General assembly, straightening work, and pressing bearings in and out of their housings.

Hydraulic Workshop Press HSP-110M-1500-HD

With a welded cast-steel framework, this hydraulic press is a must-have for any engineering workshop, repair firm, or technical training institutions.

• 110-ton maximum capacity.
• 59 inch working width.
• 8 inch diameter cylinder with 13.75 inch stroke.
• 10 hp motor runs on 220-volt 3-phase power.
• 2 speeds and pressure regulator let you adjust to suit a given project.
• Cylinder moves left and right within the frame for off-center parts.
• Effortlessly adjust the height of the heavy work table using the hydraulic cylinder and lifting chains.
• 4.09 inch chrome piston with automatic return saves time after you’re finished applying pressure.
• Typically kept in stock for fast shipping.
• Delivery in accordance with CE standards.
• Baileigh covers this H-frame press with a 1-year parts warranty.
• Lifetime technical support by phone means that project troubleshooting and advice from our experienced team is just a call away.

Recommended for: General assembly, straightening work, testing workpieces, and pressing bearings in and out.

Hydraulic Work Shop Press HSP-176M-HD

Need a lot of tonnage? Our HSP-176M hydraulic press provides 165 tons of force. Its fully-welded .375” steel plate framework can handle maximum capacity pressure every day

Features:

• 43.3 inch working width.
• 12.75 inch diameter cylinder with 11.8 inch stroke.
• Industrial-grade hydraulic system.
• 4 hp motor runs on 220-volt 3-phase power.
• 2 hydraulic speeds rapid advance and slower approach let you choose the right speed for your application.
• You can operate the ram in automatic (motorized) or manual mode (hand pump) for even more control.
• Cylinder can move left or right within the framework, perfect for off-center parts and applications.
• 5.90 inch chrome piston automatically returns to the top after you’re done pressing.
• Worktable includes 2 sets of supports made from 3 inch round stock to keep the press as stable as possible.
• Motorized table height adjustment: lifting chains on attach to the ram, so the hydraulic system does all the work. No strain on your back!
• Includes a set of V-blocks.
• Baileigh backs this hydraulic H-frame press with a 1-year parts warranty, as well as lifetime technical support by phone.

Hydraulic Work Shop Press HSP-176M-1500-HD

With a welded cast-steel framework, this hydraulic press is a must-have for any engineering workshop, repair firm, or technical training institutions.

• 165-ton maximum capacity.
• 61.75 inch working width.
• 11 inch diameter cylinder with 11.8 inch stroke.
• 3 hp motor runs on 220-volt 3-phase power.
• Hydraulic system can be operated either electrically (motor) or manually (hand pump).
• 2 speeds and pressure regulator let you adjust to suit a given project.
• Cylinder moves left and right within the frame for off-center parts.
• Effortlessly adjust the height of the heavy work table using the hydraulic cylinder and lifting chains.
• 4.75 inch chrome piston with automatic return saves time after you’re finished applying pressure.
• Comes standard with a set of V-blocks.
• Typically kept in stock for fast shipping.
• Delivery in accordance with CE standards.
• Baileigh covers this H-frame press with a 1-year parts warranty.
• Lifetime technical support by phone means that project troubleshooting and advice from our experienced team is just a call away.

Recommended for: General assembly, straightening work, testing workpieces, and pressing bearings in and out.