PRODUCTIVITY PACKS

• HM500-21  Protractor Base
• HM500-22  Protractor Arrow
• DE3278 Fabricator's Protractor Decal
• HM-61550  Star Knob 3/8-16 x 1.57 - Fabr
• HM5192 Auto-Cut Cross Clamp
• HM5205 Auto-Cut Body
• HM5206 Auto-Cut Sleeve
• HM5207 Auto-Cut Main Slide
• HM500-23 Auto-Cut Push Plate
• GRD5209 Auto-Cut Safety Guard
• HM5207-01 Auto-Cut Short Slide Bar 12
• HM5207-02 Auto-Cut Long Slide Bar 48
• HE-PRCMT18-500 Proximity Sensor - Auto Cut

Increase you Punching Efficiency and Accuracy

• Contains Punches and Dies to produce the following size round holes: 3/16. 5/16, 7/16, 1/2, 9/16, 5/8, 11/16, 13/16, 15/16, and 1-1/16 inch
• The Back Gauge utilizes a positive stop attachment that is fitted to the back of the Ironworker ensuing accurate shearing out to 48 inch

• Punch and Die Storage Tray easily mounts to either side of the output shoot
• The 48 inch Back Gauge speeds up production on repeatable cuts by providing an adjustable stop for the flat bar shear and angle shear.
• The Fabricators protractor increase accuracy on the punch and flat bar shear workstations by guiding your work piece and is gauged at 15 deg increments through 180 deg featuring a straight edge and reversible design
• A Gauging table kit includes adjustable fences and handles quickly and easily guide your material for perfect repeatable actions

• Punch diameter must meet or exceed the thickness of your material
• Super bright LED light with M12 connections has a powerful magnetic base allowing users to attach the light to any Ironworker surface and move as needed.

• Made of durable steel for long life
• Long lasting averages between 3,000 and 5,000 impacts

Increase you Punching Efficiency and Accuracy

• Contains Punches and Dies to produce the following size round holes: 3/16. 5/16, 7/16, 1/2, 9/16, 5/8, 11/16, 13/16, 15/16, and 1-1/16 inch

• Punch and Die Storage Tray easily mounts to either side of the output shoot
• A Quick Change Punch Assembly easily allows changes between different size punch and die sets saving time and money
• The Fabricators protractor increase accuracy on the punch and flat bar shear workstations by guiding your work piece and is gauged at 15 deg increments through 180 deg featuring a straight edge and reversible design
• A Gauging table kit includes adjustable fences and handles quickly and easily guide your material for perfect repeatable actions

• Punch diameter must meet or exceed the thickness of your material
• Super bright LED light with M12 connections has a powerful magnetic base allowing users to attach the light to any Ironworker surface and move as needed.

• Made of durable steel for long life
• Long lasting averages between 3,000 and 5,000 impacts
• The Quick change punch assembly accepts both standard and oversize punch and die sets
• The 3/8 inch thick, 12 x 16 inch gauging table that adds precision to your punch workstation

Increase your accuracy when use the Coper Notcher

• Fabricators Protractor can be used on both the Coper Notcher or the Flat Bar Shear

• The Fabricators protractor increase accuracy on the punch and flat bar shear workstations by guiding your work piece and is gauged at 15 deg increments through 180 deg featuring a straight edge and reversible design
• Coper Notcher Gauging Table Kit includes adjustable fences and handles quickly and easily guides your material for perfect repeatable actions

• Super bright LED light with M12 connections has a powerful magnetic base allowing users to attach the light to any Ironworker surface and move as needed.

• Provides a larger 3/8 x 12-1/2 x 5-5/8 inch size table and two fences to better align your material

MULTIPLE PRODUCTIVITY PACKS TO IMPROVE YOUR SHEARING OUTPUT

FLEXIBILITY

• Optimize your productivity on both the Flat Bar Shear and Angle Shear Workstations for your Edwards Ironworker
• Both the Back Gauge and Auto Cut utilize a positive stop attachment that is fitted to the back of the Ironworker ensuing accurate shearing out to 48 inch

PRODUCTIVITY

• Speed up production on repeatable cuts by providing an adjustable stop with the 48 inch Back Gauge
• Maximize your productivity on repeatable cuts with the 48 inch Auto Cut as the adjustable proximity sensor automatically cycles your Ironworker as you feed in material
• The Fabricators Protractor increases accuracy Punch and Flat Bar Shear Workstations by guiding your work piece and is gauged at 15 deg increments through 180 deg, featuring a straight edge and reversible design

PERFORMANCE

• Easily adjustable to align your material, the 12 and 18 inch fence guides make precise, repeatable operations simple.

Designed to improve overall Ironworker Performance

• Contains Punches and Dies to produce the following size round holes: 3/16. 5/16, 7/16, 1/2, 9/16, 5/8, 11/16, 13/16, 15/16, and 1-1/16 inch
• The Back Gauge utilizes a positive stop attachment that is fitted to the back of the Ironworker ensuing accurate shearing out to 48 inch

• Punch and Die Storage Tray easily mounts to either side of the output shoot
• The 48 inch Back Gauge speeds up production on repeatable cuts by providing an adjustable stop for the flat bar shear and angle shear.
• The Fabricators protractor increase accuracy on the punch and flat bar shear workstations by guiding your work piece and is gauged at 15 deg increments through 180 deg featuring a straight edge and reversible design
• Coper Notcher Gauging Table Kit includes adjustable fences and handles quickly and easily guides your material for perfect repeatable actions
• A Gauging table kit includes adjustable fences and handles quickly and easily guide your material for perfect repeatable actions

• Punch diameter must meet or exceed the thickness of your material
• Super bright LED light with M12 connections has a powerful magnetic base allowing users to attach the light to any Ironworker surface and move as needed.

• Made of durable steel for long life
• Long lasting averages between 3,000 and 5,000 impacts
• The Quick change punch assembly accepts both standard and oversize punch and die sets
• The 3/8 inch thick, 12 x 16 inch gauging table that adds precision to your punch workstation

All punch and die sets are available in 1/32 inch increments and are
shipped with a 1/32 inch die clearance unless otherwise noted.

Prices subject to change without notice.

Punch / Die Starter Set

Get started with the basics!

Selected to accomodate some of the most commonly used bolts, our Punch/Die Starter Set includes 8 standard round punch and die sets with 1/32 inch clearance. Sized in 1/8 inch increments from 3/16 to 1-1/16 inch and organized in a handy steel box, these are a must-have.

Customize your set - choose any eight of our standard round punch and die sets to fit your needs.

Gauging Table Kit - Precision Punching

Add precision and speed to your repeated punching projects with our 3/8 inch thick Gauging Table Kit. The large 12 x 16 inch table bolts to standard or oversize Pedestal Die Tables. The included adjustable fences and handles clamp down with heavy-duty hardware to guide your material to the same punch location every time. Custom table size and additional fences available.

Heavy Duty Gauging Table Kit - Heavy Duty Precision

Available in standard and oversize, the robust 1 x 12 x 16 inch Heavy Duty Gauging Table Kit takes the guesswork out of making precise, repeatable standard or oversize holes. Movable fences clamp down to the table surface with heavy-duty hardware to guide your material to the same punch location every time. The kit includes heavy duty table, mounting plate, hardware and one short and one long movable fence.

• Standard up to 1-1/16 inch round
• Oversize up to 1-9/16 inch round

Coper Notcher - Notch with Versatility

Coper Notcher tooling, also known as a Nibbler, creates anything from a small nibble to a large notch out of plate or angle. Our three sizes of Coper Notchers are designed to uniquely maximize the capacity and utility of each Ironworker. When versatility is key, our Coper Notcher is indispensable.

The Coper Notcher is standard on 50 Ton, 60 Ton, 65 Ton, 75 Ton, 100 Ton Deluxe, 120 Ton and ELITE 110|65 Ironworkers. See your machine specifications for details.

Order the Coper Notcher as an optional tooling accessory on the 25 Ton, 40 Ton, 55 Ton, 100 Ton, ELITE 68 and ELITE 110 Ironworkers. ** All Other Models the Coper Notcher is a STANDARD EQUIPMENT

• 25 Ton, 40 Ton, 55 Ton
• 100 Ton, ELITE 68, ELITE 110

Angle Notcher - V Notcher

Efficiently Work Angle Iron

The Angle Notcher takes a precise 92 degrees notch from the bottom leg of angle up to 3 x 3 x 1/4 inch profiles. Bend 90 degrees and quick and clean youre on your way to building a steel frame.

Pipe Notcher - A Quick, Clean, Time-Saving Tool

The Edwards Pipe Notcher eliminates hours of cutting and grinding required for clean saddle joint connections. Simply place your pipe into the bump-die housing and cut a perfect saddle each and every time. Contact  us for Schedule 80, tube dies and custom dies.

• Pipe Notcher Housing
• Pipe Notcher Housing - 65 Ton, 120 Ton, ELITE 110|65
• 1/2 inch Die (Sched. 40)
• 3/4 inch Die (Sched. 40)
• 1 inch Die (Sched. 40)
• 1-1/4 inch Die (Sched. 40)
• 1-1/2 inch Die (Sched. 40)
• 2 inch Die (Sched. 40)

Turrent Pipe Notcher - Multiple Sizes... No Problem!

The Edwards Turret Pipe Notcher Housing allows you to load your favorite pipe dies into the carousel and quickly switch from one die size to the next. Designed with a centering detent, the Turret Pipe Notch tooling eliminates the cutting and grinding required for your saddle joint connections in Schedule-40 pipe. Simply insert your mild-steel or aluminum pipe into the bump-die housing, activate the machine and cut a perfect saddle without any additional finishing work.

• 1/2 inch Die (Sched. 40)
• 3/4 inch Die (Sched. 40)
• 1 inch Die (Sched. 40)
• 1-1/4 inch Die (Sched. 40)
• 1-1/2 inch Die (Sched. 40)
• 2 inch Die (Sched. 40)

Assessory Light - Can you see the light?!

Designed with m12 connections, this super bright LED light plugs in to late model Edwards Ironworkers and has a 100,000 hour rating. Super durable lexan lens and magnetic base allow you to attach the light on any Ironworker surface.

Accessory work lights contain magnets - Magnet Safety Warning!

Disclaimer: Edwards Manufacturing neither assumes nor accepts any liability for damages resulting from the handling or use of magnets. With your purchase, the buyer confirms that you have read and understood the following warnings, the buyer agrees that he/she is responsible for all damages and injuries caused by magnets, which may include personal injuries, property and magnet damages.

Press Brake - Precise, Repeatable Bends

Brackets, frames, pans and tanks are just a few of the applications appropriate for the Edwards Brake Tooling. Available in 7, 8, 10 and 12 inch lengths (length varies by machine), Brake Tooling includes a standard punch and a four-way die that allows for 1/16, 1/8, 3/16 and 1/4 inch material to be broke to a 90 degree angle. The bottom brake die is held with brackets that easily bolt to the mounting table. Repeatable bending is achievable with the combination of Brake Tooling and the Ironworker's electric stroke control.

Manual Back Gauge - 48 inch Back Gauge - Set Your Stop

Fitted to the back of the Ironworker, the 48 inch Back Gauge accessory provides an adjustable stop for the Angle Shear and Flat Bar Shear stations of your Edwards Ironworker. The sturdy construction and positive attachment to the machine frame ensures accurate, repeatable cuts for your production jobs.

Automatic Back Gauge - 48 Inch Auto Cut
- Ease Your Production Cutting

Use this plug-and-play accessory when production cutting long material to repeatable lengths. The adjustable proximity switch automatically cycles your machine as you guide the material. The 48 inch Auto Cut, compatible with current Edwards Ironworkers, features a rugged solid-steel housing, guarding snoot, 1 x 48 inch machined back-gauge stock, electrical cording and adjustable electrical tiebacks. Installs in minutes with simple instructions.

Oversized Punch Assembly - When a Standard Punch isnt Enough

The Oversize Punch Assembly takes the place of your standard Punch Assembly to accomodate punches and dies in various shapes and sizes from 1 to 1-9/16 inch. Oversize Punch and Die Sets sold separately. See our standard stocked Punch and Die Sets and contact us for custom sizes.

• Oversize Punch Assembly
• For 100 Ton Deluxe and 120 Ton

Punched holes or shapes larger than 1-9/16 inch require the 241 Punch Assembly.

Multi Shera - Maximum Flexibility for Smaller Ironworkers

Cut solids rods, squares, angles and bar-stock all with ONE tool. The Multi-Shear makes quick work of solid round 1/4, 3/8, 1/2, 5/8, 3/4 inch rod, and 13/16 inch square. Also cuts flat bar up to 1/4 x 6 inch and angle up to 2 x 2 x 1/4 inch.

Rod Shear Housing - Shears a variety of rod

The Edwards Rod Shear and Housing is a heavy-duty accessory tool that comes ready to work your 1/4, 3/8, 1/2, 5/8, 3/4 and 1 inch solid rod.

Stripper Plate - Quality Results with Easy Operation

The Stripper Reducing Plate is a spring-loaded, self-locating accessory that minimizes distortion in thinner gauge material when using smaller punches and dies. This accessory is easily applied to stripper bars with two bolts and uses a spring-loaded detent to properly align. When not in use, the plate swings easily out of the work area. Not compatible with old-style stripper bars.

Urethane Stripper - Easily Minimizes Distortion

By maintaining constant pressure through the punch cycle, the Urethane Stripper minimizes distortion. A must-have when working with light-gauge material.

Press Bake Back Gauge - Making repeatable bends?

Our adjustable Press Brake Back Gauge makes for easy set-up of repeatable bends. Simply bolt it up to the Edwards Ironworker Brake Tooling assembly or Press Brake Tooling for our 20 Ton Shop Press and 40 Ton Shop Press, and a simple hand crank glides the carriage backstop to your desired brake location.

Pedistal Die Table (Standard on all NEW Edward's Iron Workers)

A standard feature on new Edwards Ironworkers from 25 Ton to 100 Ton, add our Pedestal Die Table to your existing Edwards Ironworker to punch flange or web surfaces of 2 x 2 inch steel angle, channel and beam sections. You can even punch larger angle sections leg-down. The Pedestal Die Table allows for the accessory Gauging Table Kit to be easily installed for a larger working and layout surface. Also available in Oversize for your larger Punch applications.

• Pedestal Die Table
• Oversize Pedestal Die Table