Clean-O-Matic Solvent Parts Washers
The Industry Standard for more than 50 years
Ruggedly constructed for years of trouble-free solvent cleaning service. These feature-packed models offer a variety of design elements to make your cleaning
tasks quicker and more efficient while remaining flexible enough to suit most cleaning challenges. All Clean-O-Matics are certified cETLus to the NEW UL1204 Parts Washer Standard.
All models feature three-way cleaning:
-
Pump for in-tank agitation that loosens dirt/grime on soaking parts
-
Pistol grip nozzle for flushing away contaminants
-
Flexible Stay-Put metal flush hose in conjunction with an (optional) hand-held brush.
New Names for Old Friends
With the introduction of the UL1204 models comes some slight tweaks to the units. There were enough changes to them that a name change was necessary.
New Friends
With the move to 1204, we also took the opportunty to add a longer version of the 500/COM504. We have called this new model the COM604. For more
information, see below.
Standard Features - All Models
-
Pistol grip spray nozzle is adjustable for light spray or solid stream – direct where cleaning and rinsing of parts is needed
-
Available in both 115V (-A) and 230V (-B)
-
Extra-long Stay-Put flexible metal flush hose for directed hands-free flushing action
-
Adjustable bi-level work shelves
-
Safety lid shuts automatically in the event of a fire – can also be closed to reduce fluid evaporation
-
Hydro-Jet Manifold in-tank agitation loosens dirt and grime as parts soak (except 304)
-
Three-way cleaning action selector valve (all models except 304) permits use of hydro-jet manifold for in-tank agitation, pistol grip spray nozzle
or flush hose cleaning actions individually or in combination
-
Washable 40 mesh screen solvent filter
-
Drain plug
-
Optional removable soak/sludge trays keep soaking parts off bottom – makes sludge removal easier
-
Rugged 16-gauge minimum welded steel tank leak tested for 24 hours after welding with powder-coat finish for durability and long-life
-
Graymills abrasive-resistant pump has no bearings/seals immersed in fluid – extends pump life
-
Freeboard compliant when lower shelves are installed and fully extende
|
CLEAN-O-MATIC Parts Washers
|
|
COM304-A
|
1/10 HP pump, 16-42 gal capacity; 115V, 1ph
|
|
COM504-A
|
1/3 HP pump, 16-42 gal capacity; 115V, 1ph
|
|
COM804-A
|
1/3 HP pump, 50-85 gal capacity; 115V, 1ph
|
|
COM904-A
|
1/3 HP pump, 50-117 gal capacity; 115V, 1ph
|
|
COM924-A
|
Two 1/3 HP pumps, 50-117 gal capacity; 115V, 1ph
|
|
ACCESSORIES
|
|
432-36664
|
Sludge Tray Assembly (NOTE: 2 Required for 900 Series )
|
|
742-09953
|
Filter Foam Poly (NOTE: 4 required for 900 Series )
|
|
432-36376
|
Sludge Tray Assy
|
|
L-3
|
For flushing small parts, 10 inch dia
|
|
L-7
|
Rectangular, with hanger 8 x 6 x 4 inch for small parts
|
|
L-8
|
Expanded metal sides and bottom. General purpose
|
|
5B-1
|
Sized and bracketed for use on 5 and 6 gallon pails
|
|
3BG
|
Standard brush, 2-1/2 inch polypropylene bristles
|
|
5D
|
Double brush, 1-1/2 and 2-1/2 inch nylon bristles
|
|
6A
|
Flow-thru brush
|
|
7A
|
Flow-thru, flat angular without valve
|
|
8A
|
Flow-thru, round angular cleaning holes surrounding filaments
|
|
L-5
|
Flo-thru perforated shelf for Clean-O-Matic models 300 or 500
|
|
L-4
|
Flo-thru perforated shelf for Clean-O-Matic model 800
|
|
L-5S
|
16-gauge steel shelf for Clean-O-Matic model 300 or 500
|
|
L-4S
|
16-gauge steel shelf for Clean-O-Matic model 800
|
|
647-36543
|
Shelf for Clean-O-Matic models 900 and 902
|
|
L-6
|
External drain tray for Clean-O-Matic models 300, 500, 800
|
Need Solvents? Click Here
|
Cold Cleaning Super Agitene
|
|
Agitene is the most effective cleaning solvent you can buy. Grease, motor oil, cutting oil and water soluble oils are removed with ease. Contains no
chlorinated solvents and conforms to California rule 66 for clean air. If your regulations require a higher flash point, Super Agitene 141 has a flash point of 141 Fahrenheit (60 C). It
contains no ingredients or characteristics listed as hazardous by the Environmental Protection Agency's RCRA Act.
Features:
-
Grease, motor oil, cutting oil and water soluble oils are removed with ease
-
Gummy deposits unaffected by ordinary mineral spirits are readily softened or removed
-
Contains Hand Ease - a cosmetic-grade lanolin formulation, which replenishes some of the skin's natural oils removed by solvents
-
It helps to reduce the chance of irritation and chapping and leaves a protective coating on parts to help retard corrosion
-
Super Agitene is a low-odor solvent with a 105 degree Fahrenheit flashpoint
-
Should not be used on parts going into a plating or painting process (See regular Agitene)
M5005 - Super Agitene. Ideal for cleaning of metal, plastics and painted surfaces. 5 gallon pail.
M8400 - Super Agitene. Ideal for cleaning of metal, plastics and painted surfaces. 50 gallon drum.
M5005-141 - Super Agitene 141. Has the same attributes as Super Agitene but a higher flash point of 141 degrees Fahrenheit which meets local regulations where
use of High Flash Point Solvent is required. 5 gallon pail. Contains no ingredients listed as hazardous by the EPAs RCRA, Meets OTC VOC regulations
M8400-141 - Super Agitene 141. Has the same attributes as Super Agitene but a higher flash point of 141 degrees Fahrenheit which meets local regulations where
use of High Flash Point Solvent is required. 50 gallon drum. Contains no ingredients listed as hazardous by the EPAs RCRA, Meets OTC VOC regulations, Available in 5 gallon pails and 50
gallon drums
|
|
Cold Cleaning Regular Agitene
|
|
Features:
-
Will not attack varnish, allowing it to be used on varnish-insulated electrical components
M2062 - Regular Agitene. Same high quality cleaning action as Super Agitene, but leaves no film thus making it ideal for cleaning parts to be painted. 5
gallon pail
M1700 - Regular Agitene. Same high quality cleaning action as Super Agitene, but leaves no film thus making it ideal for cleaning parts to be painted. 50
gallon drum
|
|
COLD CLEANING FLUIDS
|
|
Due to our responsibility to ship solvents and detergents which conform to Material Safety Data Sheet descriptions, we cannot accept returns or exchanges of
Agitene and Aquatene cleaners.
|
|
SUPER AGITENE
|
|
M5005
|
5-gallon can
|
|
M8400
|
50-gallon drum
|
|
SUPER AGITENE 141
|
|
M5005-141
|
5-gallon can
|
|
M8400-141
|
50-gallon drum
|
|
REGULAR AGITENE
|
|
M2062
|
5-gallon can
|
|
M1700
|
50-gallon drum
|
|
REGULAR AGITENE 141
|
|
M2062-141
|
5-gallon can
|
|
M1700-141
|
50-gallon drum
|
|
Hot Cleaning Aquatene 330
|
|
A general purpose concentrated detergent in liquid form. Works best when heated up to 140o F (60 C). Ideal for use in free-standing manual systems and
immersion type part washers. Removes soft carbon deposits, light coatings, grease, gummy residue, oils, latex paint, light varnishes, rust preventatives. A five gallon pail makes 25-50
gallons; a 55 gallon drum makes 275-500 gallons, depending on concentration.
Features:
Works most effectively when heated up to 140 degrees Fahrenheit
-
Ideal for use in free-standing manual systems and immersion type parts washers
-
Removes soft carbon deposits, light coatings, grease, gummy residue, oils, latex paint, light varnishes, rust preventatives
-
A five gallon pail makes 25-50 gallons, depending on concentration
-
A 55 gallon drum makes 275-500 gallons, depending on concentration
Use with: DH/PH (hot), Drum Mount (hot), Liftkleen (hot), Turbo Parts Cleaner (hot), Ultrasonic
GM330C5 - Aquatene 330. A general purpose concentrated detergent in liquid form. 5 gallon pail.
GM330C55 - Aquatene 330. A general purpose concentrated detergent in liquid form. 55 gallon drum.
|
|
Hot Cleaning Super Aquatene 360
|
|
A general purpose concentrated cleaner in liquid form can be used up to 180̡̉F for faster cleaning. Ideal for use in free-standing manual systems and
immersion type part washers. Removes all items listed for GM 330 but also effectively cuts buffing and lapping compounds, hard to remove coatings, water-based inks, oxidized oils and heavy
or burned-on varnishes. A five gallon pail makes 25-50 gallons of cleaner; a 55 gallon drum makes 275-500 gallons of cleaner, depending on concentration
Features:
-
Ideal for use in free-standing manual systems and immersion type parts washers
-
Removes all items listed for Aquatene 330 but also effectively cuts buffing and lapping compounds, hard to remove coatings, water-based inks, oxidized oils
and heavy or burned-on varnishes
-
A five gallon pail makes 25-50 gallons of cleaner, depending on concentration
-
A 55 gallon drum makes 275-500 gallons of cleaner, depending on concentration
Cleaning Problem
-
Buffing and Lapping
-
Carbon Deposits, Soft
-
Coatings, Light
-
Grease
-
Gummy Residues
-
Inks, Water Based
-
Oils
-
Oils, Oxidized
-
Paint, Latex
-
Rust Preventatives
-
Varnishes, Burned-On
-
Varnishes, Heavy
-
Varnishes, Light
-
Waxes
Use with: DH/PH (hot), Drum Mount (hot), Liftkleen (hot), Turbo Parts Cleaner (hot), Ultrasonic
GM360C5 - Super Aquatene 360. A general purpose concentrated detergent in liquid form can be used up to 180 degree Fahrenheit for faster cleaning. 5 gallon
pail.
GM360C55 - Super Aquatene 360. A general purpose concentrated detergent in liquid form can be used up to 180 degree Farenheit for faster cleaning. 55 gallon drum.
|
|
Hot Cleaning Super Aquatene 390
|
|
A heavy-duty, low-foam concentrate perfect for use in spray cabinet washers. Ideal for steel, cast iron, and other ferrous metals (not for use on non-ferrous
metals). Removes most greases, light oils, water soluble inks, hardened composites and loose metal chips. Contains a rust inhibitor. A five gallon pail makes 30-40 gallons, a 55-gallon drum
makes 300-450 gallons, depending on concentration. Heat to maximum of 150 degree F.
Features:
-
Ideal for steel, cast iron, and other ferrous metals (not for use on non-ferrous metals)
-
Removes most greases, light oils, water soluble inks, hardened composites and loose metal chips
-
Contains a rust inhibitor
-
A five gallon pail makes 30-40 gallons, depending on concentration
-
A 55-gallon drum makes 300-450 gallons, depending on concentration
-
Heat to a maximum of 150 degrees Fahrenheit
Cleaning Problem
-
Buffing and Lapping
-
Carbon Deposits, Soft
-
Coatings, Light
-
Grease
-
Gummy Residues
-
Oils
-
Oils, Oxidized
-
Paint, Latex
-
Paint, Oil Based
-
Rust Preventatives
-
Varnishes, Burned-On
-
Varnishes, Heavy
-
Varnishes, Light
-
Waxes
Use with: Liftkleen (hot), Spray Washing Cabinet, Tempest, Turbo Parts Cleaner (hot), Ultrasonic
GM390C5 - Super Aquatene 390. A heavy-duty, low-foam concentrate perfect for use in spray cabinet washers. 5 gallon pail.
GM390C55 - Super Aquatene 390. A heavy-duty, low-foam concentrate perfect for use in spray cabinet washers. 55 gallon drum.
|
|
Hot Cleaning Aquatene 571
|
|
Specially formulated for cleaning aluminum and non-ferrous metals. The powdered compound mixes at 3 to 8 ounces per gallon of water. Available in 25 lb
cartons or 100 lb. Fiber drums. Use heated to 180o F (82 C).
Features
-
The powdered compound mixes at 3 to 8 ounces per gallon of water
-
Available in 25 lb cartons or 100 lb fiber drums
-
Use heated to 180 degrees Fahrenheit
Cleaning Problem
-
Carbon Deposits, Soft
-
Coatings, Light
-
Grease
-
Gummy Residues
-
Oils
-
Oils, Oxidized
-
Rust Preventatives
-
Varnishes, Burned-On
-
Varnishes, Heavy
-
Varnishes, Light
-
Waxes
Use with: DH/PH (hot), Drum Mount (hot), Liftkleen (hot), Spray Washing Cabinet, Tempest, Turbo Parts Cleaner (hot)
GM571-25 - Aquatene 571. Specially formulated for cleaning aluminum and non-ferrous metals. 25lb carton.
GM571-100 - Aquatene 571. Specially formulated for cleaning aluminum and non-ferrous metals. 100lb fiber drum.
|
|
HOT CLEANING FLUIDS
|
|
AQUATENE 330
|
|
GM330C5
|
*5-gallon concentrate (makes 25-50 gallons)
|
|
GM330C55
|
55-gallon drum concentrate (makes 275-500 gallons)
|
|
AQUATENE 360
|
|
GM360C5
|
*5-gallon concentrate (makes 25-50 gallons)
|
|
GM360C55
|
55-gallon drum concentrate (makes 275-500 gallons)
|
|
AQUATENE 390 LOW FOAM CLEANING FLUID
|
|
GM390C5
|
*5-gallon concentrate (makes 30-40 gallons)
|
|
GM390C55
|
55-gallon drum concentrate (makes 330-450 gallons)
|
|
AQUATENE 571
|
|
GM571-25
|
25 lbs powdered detergent
|
|
GM571-100
|
100 lbs powdered detergent
|
|
*Individual 5-gallon containers may be shipped UPS with an additional $9.00 packaging, handling charge added to the shipment. Total cost will be considerably
less than common carrier on less than pallet quantities.
|
|
APPROVALS-
|
|
Regular and Super Agitene: U/L file MH3717 And City of N.Y. Approval, Certificate no. 2782
|
Biodegradable Hot Cleaning Fluids Product Description
GM550-QT
Super Biotene 550(Concentrate). A concentrated detergent designed for our Bioremediation models, although it is also a good general purpose cleaner. One quart liquid
concentrate.
GM550-1
Super Biotene 550(Concentrate). A concentrated detergent designed for our Bioremediation models, although it is also a good general purpose cleaner. One gallon liquid
concentrate.
GM660-5
Super Biotene 660(Pre-blended). Same as Super Biotene 550, but in a five-gallon pail of pre-blended, ready-to-use formula
STANDARD FEATURES
-
Super Biotene is an aqueous-based solution that is pH neutral (7.0) mixture of emulsifiers and surfactants containing no
VOCs
-
Available in one quart liquid concentrate that makes five gallons of cleaner or one gallon liquid concentrate that makes 21 gallons of
cleaner
|
Biodegradable Hot Cleaning Fluids
|
|
BIOTENE - SUPER-BIOPAK
|
|
GM660-5
|
5-gallon pre-mixed cleaning fluid
|
|
GM550-QT
|
1-quart concentrate (makes 5 gallons)
|
|
GM550-1
|
1-gallon concentrate (makes 20 gallons)
|
|
GM880-5
|
Super Biotene pre-blended solution, 5 gallon pail
|
|
*Individual 5-gallon containers may be shipped UPS with an additional $9.00 packaging, handling charge added to the shipment. Total cost will be considerably less than common carrier on less
than pallet quantities.
|
|
APPROVALS-
|
|
Regular and Super Agitene: U/L file MH3717 And City of N.Y. Approval, Certificate no. 2782
|
