This new PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30" x 40" precision ground cast iron table includes a
heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and
belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability
to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the
precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters
for those raised panel doors.
Features:
-
Integrated caster system built into the cast iron base for instant shop mobility
-
Spindle height digital readout for making fine incremental adjustments on multiple passes
-
Heavy duty 30 x 40 inch precision ground tabletop for smooth stock feeding
-
Convenient quick lock belt tensioning for easy speed adjustment
-
Industrial fence system with fine adjust dials for more precise positioning
-
5HP totally enclosed motor offers plenty of power
-
Two spindle speeds (reversible) for a variety of work
-
Superior clear cutter guard promotes safety, allows observation of the entire cut
-
Table predrilled and tapped for feeder mounting in two locations
-
Fence has dual featherboards for work holding
-
Dual 4" ports for attachment to dust collection system
Standard Equipment:
-
3/4" and 1-1/4" interchangeable spindle collets
-
Spindle height digital readout
-
Featherboard hold downs
-
Deluxe miter gauge
-
Integrated caster system
|
SPECIFICATIONS
|
|
Stock No.
|
1280100C
|
1280101C
|
1280102C
|
|
Motor
|
3HP, 1Ph, 230V
|
5HP, 1Ph, 230V
|
5HP, 3Ph, 230V/460V, Prewired 230V
|
|
Spindle Speeds
|
7500 and 10,000
|
7500 and 10,000
|
7500 and 10,000
|
|
Reversible
|
YES
|
YES
|
YES
|
|
Table Size (in)
|
40 x 30
|
40 x 30
|
40 x 30
|
|
Table Opening Dia. (in)
|
7-3/8
|
7-3/8
|
7-3/8
|
|
Table Insert Opening Dia. (in)
|
2-3/4 x 3-7/8
|
2-3/4 x 3-7/8
|
2-3/4 x 3-7/8
|
|
Fence Size (in)
|
4-7/8 x 18-3/4
|
4-7/8 x 18-3/4
|
4-7/8 x 18-3/4
|
|
Spindle Travel (in)
|
4
|
4
|
4
|
|
Spindle Sizes (in)
|
3/4,1-1/4
|
3/4,1-1/4
|
3/4,1-1/4
|
|
Under nut capacity {Spindle dia. - Capacity (in}
|
3/4-3-3/4 & 1-1/4-6
|
3/4-3-3/4 & 1-1/4-6
|
3/4-3-3/4 & 1-1/4-6
|
|
CFM minimum requirement
|
600
|
600
|
600
|
|
Overall Dimensions (L x W x H/in.)
|
40 x 37 x 45
|
40 x 37 x 45
|
40 x 37 x 45
|
|
Ship Weight (lbs)
|
690
|
690
|
690
|
TS29 Tilt/Slide Shaper
The new TS29 is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently
adjustable fence halves for fast, easy, and accurate set-ups.
The full guard includes two stock hold downs and a see through cover that flip up for quick tool changes. Dual dust collection ports, in the
guard and under the table insure a clear work area and improved finish.
An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and
insuring long, trouble free performance. Powered by a big 71/2HP motor that drives the spindle forward and reverse with five speeds.
The massive sliding table is fully supported by six tapered precision bearings through a full four foot stroke. In addition, on board the
table is a large miter head complete with stock hold down clamp and a 56-inch miter fence with flip stop.
The large table can easily accommodate a stock feeder for longer production runs; this machine is built to handle any job
FEATURE
-
Sliding table with miter head, hold down and fence
-
Fully adjustable fence with dual digital readout
-
Large table with built-in slider with room for stock feeder
-
7-inch vertical spindle travel
-
Spindle tilts neg. 5 to pos. 45 degrees
-
Large diameter multiple table inserts
-
Five spindle speeds in forward and reverse with lighted indicator
BENEFIT
-
Can accommodate everything from multiple end cuts to tenons
-
Fast and accurate set-up and repeatability
-
Supports large work pieces; added safety option with feeder
-
Allows user to stack tooling
-
Increased versatility with tooling
-
Accommodate virtually any size cutter
-
The correct speed for any job
|
Specifications
|
|
Model Number
|
TS29
|
|
Stock Number
|
1791284
|
|
Motor HP/Voltage/Phase
|
7 1/2HP, 230/460V 3Ph
|
|
Electric Controls
|
24V magnetic
|
|
Spindle Sizes w/Capacity Under Nut
|
1 1/4" dia. x 6 1/4', 1" dia. x 6", 3/4 dia. x 3 1/2", 1/4", 1/2" collets
|
|
Spindle Travel
|
7" vertical
|
|
Spindle Speeds (rpm)
|
3000, 4000, 6000, 8000, 10,000
|
|
Tilting Spindle
|
5° back, 45° forward
|
|
Overall Tale Size (l x w x H)
|
51 1/2 x 33 1/2
|
|
Max. Diam. Cutter Below Table
|
9"
|
|
Max. Diam. Cutter Above Table
|
12"
|
|
Fence Size (w/Dual Digital Readouts)
|
46" x 5"
|
|
Fence Travel (major & minor)
|
5 3/8"/3 5/8"
|
|
Slide Table Size
|
11 1/4" x 51 1/4"
|
|
Table Travel
|
49 1/4"
|
|
Table Inserts
|
One tilting, one straight
|
|
Min. CFM Required
|
800
|
|
Shipping Weight
|
1280lbs
|
|
Net Weight
|
1100lbs
|
|
Overall Dim.
|
51"l x 44"w x 53"h
|
|
Tools Supplied
|
Spindle wrenches, spanner wrench, set of open end wrenches, set of allen wrenches, grease gun, tool box
|
