Baileigh TS-1040C Contractor Table Saw

Entry Level Cabinet Saw TS-1040E-30

This excellent starter cabinet-style table saw includes features typically found only on more expensive tables, like a Leeson motor, UHMW rip fence, and massive trunnion.

• 30 inch right-side rip capacity.
• 2 hp Leeson motor turns the blade at 3,850 rpm.
• Runs on 220-volt single-phase power.
• Uses standard 10 inch blades with 5/8 inch arbor.
• Comes with both standard and dado inserts.
• 40 x 27 inch table and extensions made from precision-ground cast iron.
• Table is webbed into the base with a crisscross pattern that prevents warping or shrinkage. The cast iron surface will remain true.
• Extension boards help you cut materials that are big and tough to handle.
• Heavy-duty hardened UHMW plastic rip fence makes it easy to slide material towards the blade.
• You can cheaply replace the rip fence if you drill into it (convenient if you use unusually-shaped jigs).
• Designed with a trunnion attached to the the base to keep the machine wobble-free and accurate.
• Attached trunnion also dampens noise to a safe decibel range.
• Robust welded steel framework minimizes vibrations, so you dont have to worry about the blade shifting back and forth with the table.
• 2 steel handwheels on the cabinet allow you to change the blade height and the miter angle.
• Miter gauge located on base.
• 4 inch dust collection port lets you hook up an extraction system.
• Slanted surface inside cabinet directs sawdust towards the port to eliminate build-up.
• CSA approved.
• Safety guard on the blade has reverse teeth to prevent kickback.
• Riving knife spreads the wood as you’re cutting to avoid twisting or pinching.
• We keep this saw and replacement parts in stock for fast shipping.
• Protected by a 1-year parts warranty.
• You can depend on lifetime technical support by phone. Whenever you need help or have questions, you can call up a team of reps with hands-on machine experience.

Recommended for: Small woodworking businesses that need a high-quality saw to use for a few hours a day.

Entry Level Cabinet Saw TS-1040E-50

1008074

If you are looking for a great entry level cabinet maker table saw, take a look at the TS-1040E series from Baileigh Industrial.  This saw has many features only found on more expensive saws.  Available with 30 inch and 50 inch right side rip capacities, this 10 inch table saw will be at home in any shop.  The TS-1040E has a 2 hp motor 220 volt single phase power and turns at 3850 rpm.

The table and extensions for the TS-1040E are made from precision ground cast iron.  The TS-1040E-30 has a 30 inch extension board and the TS-1040E-50 has a 50 inch extension board.  Extension boards are great for those materials that are really big and tough to handle.  Other standard features to the TS-1040E series are; miter gauge, standard and dado inserts, deluxe rip fence and 4 inch dust collection port.

Riving Knife Table Saw TS-1040P-30  SKU: 1008075

We designed this 550-pound cabinet saw for professional accuracy. The steel base and cast-iron table reduce vibrations and keep correct alignment, so you can make perfect joints.

• 30 inch right-side rip capacity.
• 3 hp Leeson motor turns at 4,300 rpm and cuts maple like it was pine.
• The motor gets up to full speed in seconds.
• Runs on 220-volt single-phase power, so it will work in almost any shop.
• Uses standard 10 inch blades with 5/8 inch arbor.
• Includes standard and dado inserts.
• 40 x 27 inch table, made of cast iron, with 30 inch extension boards, made of impregnated poly, help you handle large, awkward pieces.
• Tabletop is webbed into the base to stay square and true. Heat and moisture in your shop won’t warp it.
• Wood glides across the ground and polished cast iron table surface. You can bring back the original smooth shine even after years of use.
• Rip fence made of heavy UHMW plastic makes it easy for you to slide wood.
• You can inexpensively replace the rip fence plastic—convenient if you drill into it while using a unusually-shaped jig.
• Steel handwheels with locks on the base let you adjust the blade height and miter angle.
• Comes standard with a miter gauge for repeatability.
• Trunnion attached to the base prevents the machine from wobbling and keeps noise within a safe decibel range.
• Rigid all-steel base keeps the saw stable and aligned, so the blade will cut correctly (without unintended movement or mitering).
• 4 inch dust collection port to hook up an extraction system and suck out sawdust.
• CSA approved, with safety features like an anti-kickback blade guard and a quick-release riving knife.
• Covered by a 1-year parts warranty.
• You can count on lifetime technical support by phone. Call up our team of reps (all with hands-on machine experience) whenever you have questions or problems.
• We typically keep all replacement parts in stock for fast deliveries.

Recommended for: Cabinetry, kitchen build-ins and shelving, furniture, live edge, or reclaimed lumber.

Riving Knife Table Saw TS-1040P-50 

1008076

Professional cabinet table saws are a must for any woodworking shop.  The TS-1040P riving knife table saw is a great saw for making perfect joints in cabinets and other projects.  Available in two versions the TS-1040P-30 and the TS-1040P-50, the last number refer to the length of the right side rip capacities. This 10 inch table saw will be at home in any shop. Because of the 3hp Leeson motor that can be run on 220 volt single phase power and turns at 4300 rpm.

The table and extensions for the TS-1040P are made from precision ground cast iron.  These tables are placed upon a super rigid all steel base for accurate alignment.  The TS-1040P-30 has a 30 inch extension board and the TS-1040P-50 has a 50 inch extension board.  Extension boards are great for those materials that are really big and tough to handle.  Other standard features to the TS-1040E series are; miter gauge, standard and dado inserts, deluxe rip fence and 4 inch dust collection port.  For more information contact a representative today.