Baileigh CNC Router Tables

Desktop CNC Engraving Table - DEM-0906

The DEM-0906 is a small, lightweight, and portable mini desktop CNC engraver that is not only for small woodworking projects, but also for acrylic and ABS lathophane, EVA foam, styrofoam, modeling wax, plastic, soft metal. It's able to carve products like tooling boards, toolboxes, tiny ornaments and other miscelaneous projects.

The DEM-0906 portble CNC engraver comes with software, and tooling often not included with competing tables that cost more. Built to last and the router arrives fully assembled.

Features:

• 12.6 x 5.9 inch table.
• This small CNC engraver is recommended for sign-makers, and hobbyists.
• Powerful 150 watt DC Brushless Motor.
• Up to 15,000 rpm variable spindle speed.
• Runs on 110v power.
• Easy-to-learn design software; just install it onto your computer and start creating patterns.
• Upload your design file to the table via a USB drive, then use the convenient handheld controller to move the spindle.
• Stepper motors move the spindle at a maximum speed of 98.43 inch per minute.
• Belt driven X, Y, and Z axis movement for accurate positioning.
• 4 T-slotted clamps fit on the table to hold the material down for clean cuts.
• Laser engraver ready, (sold seperatly)
• Structurally strong extruded aluminum table won’t buckle under material weight or spindle pressure.
• The table ships pre-built with correct alignment for a fast and simple set-up - just an hour or so to uncrate the table and get started with the software.
• Covered by a 1-year parts warranty.
• Lifetime technical support by phone: you can call our experienced reps whenever you have a question or need troubleshooting.

DEM-1717 - Desktop CNC Engraver

The DEM-1717 is a desktop CNC router that is not only for small woodworking projects, but also for acrylic, ABS lathophane, EVA foam, styrofoam, modeling wax, plastic and soft metal. It's able to carve products like tooling boards, toolboxes, tiny ornaments, and other pojects.  The DEM-1717 and has also been used as teaching equipment in various high schools, and colleges worldwide.

The DEM-1717 CNC router table comes with software, and tooling often not included with competing tables that cost more. Built to last and the router arrives fully assembled.

Features:

• 17 x 17 inch table.
• Recommended for sign-makers, and hobbyists.
• Powerful 200 watt DC Brushless Motor.
• Up to 20,000 rpm variable spindle speed.
• Runs on 110v power.
• Easy-to-learn software; just install it onto your computer and start working.
• Upload your design file to the table, then use the convenient handheld controller to move the spindle.
• Stepper motors move the spindle at a maximum speed of 98.43 inch per minute.
• Belt Drive X, Y, and Z axis movement for accurate positioning.
• ER-11 - 4.0 mm tooling diameters.
• 4 T-slotted clamps fit on the table to hold the material down for clean cuts.
• Laser engraver ready, (sold seperatly)
• Structurally strong extruded aluminum table won’t buckle under material weight or spindle pressure.
• The table ships pre-built with correct alignment for a fast and simple set-up just an hour or so to uncrate the table and get started with the software.
• Covered by a 1-year parts warranty.
• Lifetime technical support by phone: you can call our experienced reps whenever you have a question or need troubleshooting.

DEM-2720 Desktop CNC Engraver

The DEM-2720 desktop CNC router table comes with software, and tooling often not included with competing tables that cost more. Built to last and the router arrives fully assembled.

Features:

• 25.5 x 35.5 inch table.
• Recommended for sign-makers, and hobbyists.
• Powerful 200 watt DC Brushless Motor.
• Up to 20,000 rpm variable spindle speed.
• Runs on 110v power.
• Easy-to-learn design software; just install it onto your computer and start creating patterns.
• Upload your design file to the table via a USB drive, then use the convenient handheld controller to move the spindle.
• Stepper motors move the spindle at a maximum speed of 98.43 inch per minute.
• Lead screw X, Y, and Z axis movement for accurate positioning.
• ER-11  4.0 mm tooling diameters.
• 4 T-slotted clamps fit on the table to hold the material down for clean cuts.
• Laser engraver ready (Sold Seperatly)
• Structurally strong extruded aluminum table won’t buckle under material weight or spindle pressure.
• The desktop CNC router table ships pre-built with correct alignment for a fast and simple set-up just an hour or so to uncrate the table and get started with the software.
• Covered by a 1-year parts warranty.
• Lifetime technical support by phone: you can call our experienced reps whenever you have a question or need troubleshooting.

CNC Router Table WR-32

The WR-32 CNC router table comes with software, tooling, and a dust shroud often not included with competing tables that cost more. Built to last with a cast iron base, the metal router arrives fully assembled.

Features:

• 2’ x 3’ table.
• Recommended for sign-makers, hobbyists, molding companies (plastic parts), research and development (R&D) shops, and industrial wood shops.
• Powerful 4.75 hp spindle.
• Up to 18,000 rpm variable spindle speed.
• Runs on 220-volt single-phase power.
• Easy-to-learn design software; just install it onto your computer and start creating patterns. (Details below.)
• Upload your design file to the table via a USB drive, then use the convenient handheld controller to move the spindle.
• Stepper motors move the spindle at a maximum speed of 6.5 inch per second.
• Ball screw X and Y axis movement for accurate positioning.
• Square slideways clamp the material down and keep it in alignment.
• 4 collets choices,1/8 inch, 4mm, 6mm, and 1/2 inch (1 each) in the ER25 style.
• Comes standard with 15 starter router profiles.
• Air-cooled spindle prolongs machine life and helps to maintain high cut quality down the road.
• 4 T-slotted clamps fit on the table to hold the material down for clean cuts.
• Structurally strong extruded aluminum table won’t buckle under material weight or spindle pressure.
• The table ships pre-built with correct alignment for a fast and simple set-up just an hour or so to uncrate the table and get started with the software.
• Rigid cast base and fully-welded steel frame reduce vibrations, so the table can cut correctly over decades of use.
• Dust shroud fits over the spindle and vacuums sawdust off the table while you cut, keeping your shop neat.
• Covered by a 1-year parts warranty.
• Lifetime technical support by phone: you can call our experienced reps whenever you have a question or need troubleshooting.

The WR-32 comes standard with BobCAD-Cam V29 Express programming software. You can design or plot out your project on any computer and load the table via a USB drive

CNC Router Table WR-84V

With a welded steel frame, the WR-84V industrial wood router is built to last. Unlike many competing tables, this 4x8 CNC router table ships fully assembled and comes with software, tooling, and a dust shroud.

Features:

• 4’ x 8’ table to fit common bulk industrial material sizes.
• Perfect for solid wood processing, making closet doors, furniture, signs, and much more.
• 0 to 18,000 rpm variable spindle speed range.
• 7.4 hp spindle has the power to cut hardwoods quickly and precisely.
• Spindle is air-cooled to prevent overheating, prolong the machine’s lifespan, keep it producing high-quality cuts.
• 15,000 mm per minute maximum engraving or travel speed.
• Solid steel gantry can tackle hardwoods at high speeds without flinching.
• Stepper motors with square rails ensure smooth movement along the X, Y, and Z axes.
• Use the handheld digital controller to move the spindle, adjust the speed, and go through your design.
• Comes standard with software that allows you to set up almost any kind of design. (Details below.)
• Upload your cut pattern to the table with a USB drive.
• Rack and pinion mechanism holds up over long periods of heavy use and allows for more fluid and precise movement than a ball and screw mechanism.
• 4 collets accept any standard tooling profiles with 1/8, 1/4, 3/8, and 1/2 inch bit sizes.
• Includes 10 different tooling profiles.
• Steel T-clamps hold the material down on the table to reduce vibrations and prevent errors.
• Table is preplummed 4 vacuum zones, each with a separate valve and handle, ready to accept optional 7hp vacuum pump.
• Extremely rigid steel structure reduces vibrations and helps the table stay accurate for years.
• Dust shroud covers the spindle and vacuums out sawdust and wood chips while you’re cutting.
• Covered by a 1-year parts warranty.
• Lifetime technical support by phone: Call up Baileighs team of reps, all with hands-on machine experience, whenever you need help.

The WR-48 comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the table via a USB drive.

WR-84V-ATC - CNC Router Table

This large CNC router table can automatically change tooling in just 8 seconds. You can program profile switches right into your design to save time and maintain precision during industrial production runs.

Features:

• Large 4’ x 8’table.
• Arrives pre-built with correct alignment. No complicated set-up process.
• Comes with software for plotting out designs on your computer, then turning them into cut patterns for the machine.
• Runs on 220-volt 3-phase power.
• Powerful 10hp spindle can tackle hard materials without flinching.
• 7.5 kilowatt air-cooled spindle will stay accurate through years of production.
• Variable spindle speed, from 3000 to 24,000 rpm.
• Servo motors ensure smooth running at both fast and slow speeds.
• High gantry is up and away from material, allowing you to see what it’s doing.
• Y axis moves far enough for the gantry to clear the table. You can take the material directly off; no need slant it awkwardly.
• Upload your design to the table with a USB drive. Automatic tooling changes let you swap out bits with computer-controlled precision. Sensor compensates for the change in tool lengths. That change might seem tiny, but it makes a huge difference to the finished product.
• Pre-load up to 4 collets with your chosen profiles; the router will switch between them as programmed.

• Powerful 7hp vacuum in the bed of the table holds the material in place during the cutting process.  

• 4 vacuum zones allow you to turn on the valve only for the area where you’re working.
• Arrange each zones vacuum seal into the shape of the material to provide well-distributed suction.
• Dust shroud fits over the spindle; you can vacuum out all the dust and chips while you’re cutting.
• Fully-welded steel frame keeps the machine stable, helping the router last longer and preventing vibrations from taking the cut off-course.
• Covered by a 1-year parts warranty.
• You can count on lifetime technical support by phone from Baileigh’s team of reps, all with hands-on product experience

The WR-84V-ATC comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the table via a USB drive

CNC Wood Router Table - WR-105V-ATC

This CNC wood router table can automatically change tooling in just 8 seconds. You can program profile switches right into your design to save time and maintain precision during industrial production runs.

Features:

• Large 5’ x 10’table.
• Arrives pre-built with correct alignment. No complicated set-up process.
• CNC wood router table comes with software for plotting out designs on your computer, then turning them into cut patterns for the machine.
• Runs on 220-volt 3-phasepower.
• Powerful 12hp spindlecan tackle hard materials without flinching.
• 9 kilowatt air-cooled spindlewill stay accurate through years of production.
• Variable spindle speed, from 0 to 24,000 rpm.
• Servo motorsensure smooth running at both fast and slow speeds.
• High gantry is up and away from material, allowing you to see what it’s doing.
• Y axis moves far enough for the gantry to clear the table. You can take the material directly off; no need slant it awkwardly.
• Upload your design to the table with a USB drive. Automatic tooling changes let you swap out bits with computer-controlled precision. Sensor compensates for the change in tool lengths. That change might seem tiny, but it makes a huge difference to the finished product.
• Pre-load up to 6 collets with your chosen profiles; the router will switch between them as programmed.

• Powerful 7hp vacuum in the bed of the wood router machine holds the material in place during the cutting process.  

• 4 vacuum zonesallow you to turn on the valve only for the area where you’re working.
• Arrange each zone’s vacuum sealinto the shape of the material to provide well-distributed suction.
• Dust shroudfits over the spindle; you can vacuum out all the dust and chips while you’re cutting.
• Fully-welded steel framekeeps the machine stable, helping the router last longer and preventing vibrations from taking the cut off-course.
• CNC wood router table covered by a 1-year parts warranty.
• You can count on lifetime technical support by phone from Baileigh’s team of reps, all with hands-on product experience

The WR-105V-ATC comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the table via a USB drive.