Baileigh Downdraft Tables

Downdraft Table DDTM-5922

Whether it is before or after, often at welding workstations grinding on the work piece has to be done.  But this is a messy proposition for most shops.  The DDTM-5922 downdraft grinding table from Baileigh Industrial can help.  This easy to use down draft table takes all the little partials that float around the shop and pull them straight down into a contained unit and also help to clean the air. 

What is unique about the DDTM-5922 metal working downdraft table is that it is a self-contained unit and there is no need to hook it up to external extraction systems.  It operates on 110 volt power and has two .5hp motors that produce 1790 CFM per motor.  That is a lot of sucking power to keep the area clean.  The filters are also fire resistant on this grinding station making it very safe as well

• 59 x 22 in downdraft table
• 3 mm thick stainless steelwork surface
• Perfect for grinding and sanding
• Dual motors 1790 CFM per motor
• Fire resistant air filters
• Easy clean out chip compartments
• 110V

Downdraft Table DDTM-8024

Every Fabrication shop has the need for a welding and grinding station, but this is one of the messiest places in the shop.  The DDTM-8024 metal grinding downdraft table from Baileigh industrial can help with that.  This 80 in long grinding table features a 3mm thick work table made out of stainless steel and can hold up to 660lbs.

What make the DDTM-8024 metal grinding downdraft table stand out from the competition is that there is no need for external vacuum sources to clean the air.  This unit is completely self-contained.  It features two 1hp motors that run on 220v single phase power.  Through the use of this dual motor system, it can produce up to 1950 CFM per motor.  Also the DDTM-8024 uses fire resistant filters to help with safety.

• 80 x 24 in downdraft table
• 3 mm thick stainless steelwork surface
• Perfect for grinding and sanding
• Dual motors 1950 CFM per motor
• Fire resistant air filters
• Easy clean out chip compartments
• 220V single phase

Heavy Duty Downdraft Table DDTM-4840-HD

Downdraft tables are becoming more popular with all of the air quality regulations that are now in place.  The Heavy Duty Downdraft Table DDTM-4840-HD is the perfect table for small shop tht has a need for a production table.  This easy to use down draft table takes all the little partials that float around the shop and pull them straight down into a contained unit and also help to clean the air.   The DDTM-4840-HD has a list of features that make it one of the best tables on the market.

• 48 x 40 in Working area
• Standard equipment included: HEPA filter, fire resistant cartridge filter, spark arresting metallic pre-filter, magnehelic gauge, hinged side walls w/ back wall, work light, auxiliary 110V and air tool outlets, 12” overhang, casters and leveling feet.  These are all options other companies charge for, but come standard with Baileig
• CSAus listed
• 100 percent Tool free cleaning and filter maintenance/changes
• Air pulse cleaning - When flow is restricted, simply shut the machine off, and press the air pulse button (requires 60-90psi air connection).  An internal air tank automatically backflushes the cartridge filter, knocking off accumulated dust and debris (he debris falls into a removable pan for easy cleanout).  The table can now be turned on and work resumed 
• Safety - Under OSHA decibel limit (hearing protection not required).  HEPA filter is now required by OSHA for equipment that vents back into occupied space (HEPA is standard on these models)
• Fully Assembled - Simply uncrate, wire, and begin use

-Table Load Capacity â€“ 

Maximum 1543lbs (700kgs) Evenly distributed over 80 - 100 percent of table surface.

Concentrated Contact Surface Contact Weight

• 10 percent 192lbs (87kgs)
• 20 percent 384lbs (174kgs)
• 30 percent 575lbs (261kgs)
• 40 percent 767lbs (348kgs)
• 50 percent 959lbs (435kgs)
• 60 percent 1151lbs (522kgs)
• 70 percent 1343lbs (609kgs)
• 80 percent 1543lbs (700kgs)

Heavy Duty Downdraft Table DDTM-8052-HD

Downdraft tables are becoming more popular with all of the air quality regulations that are now in place.  The Heavy Duty Downdraft Table DDTM-8052-HD is the perfect table for large manufactureing facility has a need for a clean production.  This easy to use down draft table takes all the little partials that float around the shop and pull them straight down into a contained unit and also help to clean the air.   The DDTM-8052-HD has a list of features that make it one of the best tables on the market.

• 78 x 52 inch Working area
• Standard equipment included: HEPA filter, fire resistant cartridge filter, spark arresting metallic pre-filter, magnehelic gauge, hinged side walls w/ back wall, work light, auxiliary 110V and air tool outlets, 12 inch overhang, casters and leveling feet.  These are all options other companies charge for, but come standard with Baileig
• CSAus listed
• 100 percent Tool free cleaning and filter maintenance/changes
• Air pulse cleaning – When flow is restricted, simply shut the machine off, and press the air pulse button (requires 60-90psi air connection).  An internal air tank automatically backflushes the cartridge filter, knocking off accumulated dust and debris (he debris falls into a removable pan for easy cleanout).  The table can now be turned on and work resumed 
• Safety - Under OSHA decibel limit (hearing protection not required).  HEPA filter is now required by OSHA for equipment that vents back into occupied space (HEPA is standard on these models)
• Fully Assembled - Simply uncrate, wire, and begin use

-Table Load Capacity – 

Maximum 1764lbs (800kgs) Evenly distributed over 80 - 100 percent of table surface.

 Concentrated Contact Surface Contact Weight

• 10 percent 221lbs (100gs)
• 20 percent 441lbs (200kgs)
• 30 percent 661lbs (300kgs)
• 40 percent 882lbs (400kgs)
• 50 percent 1102lbs (500kgs)
• 60 percent 1323lbs (600kgs)
• 70 percent 1543lbs (700kgs)
• 80 percent 1764lbs (800kgs