Baileigh Plasma Tables

With a welded steel frame, this CNC plasma table is built to handle large metal sheets. It comes fully assembled, includes software, and offers unbeatable value for industrial use.

Plasma torch systems sold separately. We’ll let you choose the Thermal Dynamics Cutmaster model that works best for your application. This table is compatible with automatic torches, but not manual ones.

The PT-44M comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive.

• 4’ x 4’ working area.
• Requires just 220 volts of single-phase power.
• Will work at almost any fabrication site throughout North America.
• Design software package (details below) comes standard. Our customers typically learn how to use it in a matter of minutes.
• Cuts at a fixed height (which you can adjust between cuts), ideal for working with flat materials. Just input the position on the Z axis.
• Bulit in control panel with hand held pendent lets you move the torch on the X, Y, and Z axis.
• Industrial-grade stepper motors control the X, Y, and Z axis for fast, reliable torch movement.
• Weve enclosed all electronic parts for smooth operation. No need to worry about tangling or cutting wires!
• Water table to help keep smake and debris from esacping into the air.
• Heavy-gauge boxed steel construction can support the maximum plate size and thickness without flinching.
• Stays accurate over decades of use. Extruded aluminum frames, used by many competitors, warp under the heat but our steel table will stay square and true.
• Weighs 1300 lbs., which should tell you just how robust and sturdy this machine is!
• Arrives pre-built, saving you assembly time and ensuring that the alignment is correct.
• Covered by a 1-year parts warranty.
• We keep replacement parts in stock for fast deliveries.
• You can count on lifetime technical support by phone. If you run into a problem or need advice on a project, call our team of experienced reps.

Plasma Table PT-44AHC

With variable height control, the PT-44AHC makes perfect cuts in uneven material. This CNC plasma table comes assembled with a heavy steel frame and includes design software.

Plasma torch systems sold separately. We’ll let you choose the Thermal Dynamics Cutmaster model that works best for your application. This table is compatible with automatic torches, but not manual ones.

The PT-44AHC comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive.

• 4’ x 4’ working area.
• Runs on 220-volt single-phase power, so it will work at most sites in North America.
• Customers love the design software package (more details below), which takes just a few minutes to learn.
• You can control the X, Y, and Z axes using the integrated panel on the podium.
• Automatic height control is integrated into the operators panel, eliminating secondary systems found on many other tables.
• If the material is uneven or puckers under the heat of the torch, the variable height control will rise or lower in real time while cutting.
• X, Y, and Z axis are controlled by quality stepper motors, allowing for fast and fluid movement.
• Fully enclosed wires and electronics prevent snags and tangles.
• Made of heavy-gauge boxed steel, this table can easily support large, thick industrial-sized sheets of metal.
• Steel frame will remain straight and accurate over the years unlike competing plasma tables with aluminum frames, which will warp from heat.
• Ground, hardened, and polished square rails combined with linear orbital bearings add impressive strength to the machine.
• Arrives pre-built at your shop, so you don’t have to spend hours putting it together and risk misalignment.
• Industrial downdraft system removes dirt and debris from the table and your shop.
• To get started just: Uncrate the machine. Add a plasma system, power, and a clean, dry air supply. Hook up the exhaust.
• Covered by a 1-year parts warranty.
• We keep most replacement parts in stock for quick shipping.
• You can depend on lifetime technical support by phone from our team of knowledgeable reps.

PT-44AH-W - CNC Plasma Table

With variable height control, the PT-44AH-W makes perfect cuts in uneven material. This CNC plasma table comes assembled with a heavy steel frame and includes design software.

Features:

• 59 x 59 inch working area.
• Runs on 220-volt single-phase power, so it will work at most sites in North America.
• Customers love the design software package (more details below), which takes just a few minutes to learn.
• You can control the X, Y, and Z axes using the integrated panel on the podium.
• Automatic height control is integrated into the operator’s panel, eliminating secondary systems found on many other tables.
• Operators podium provides space for plasma power unit even while cutting.
• If the material is uneven or puckers under the heat of the torch, the variable height control will rise or lower in real time while cutting.
• X, Y, and Z axes are controlled by quality stepper motors, allowing for fast and fluid movement.
• Fully enclosed wires and electronics prevent snags and tangles.
• Made of heavy-gauge boxed steel, this CNC plasma cutting machine can easily support large, thick industrial-sized sheets of metal.
• Steel frame will remain straight and accurate over the years - unlike competing plasma tables with aluminum frames, which will warp from heat.
• Ground, hardened, and polished square rails combined with linear orbital bearings add impressive strength to the machine.
• Arrives pre-built at your shop, so you don’t have to spend hours putting it together and risk misalignment.
• Integrated water table helps control smoke and dust created while cutting to help keep your shop clean.
• To get started just:
  • Uncrate the machine.
  • Add a plasma system, power, and a clean, dry air supply.
  • Fill tank with water.
• Industrial plasma cutter Covered by a 1-year parts warranty.
• We keep most replacement parts in stock for quick shipping.
• You can depend on lifetime technical support by phone from our team of knowledgeable reps.

Plasma torch systems sold separately. We’ll let you choose the Thermal Dynamics Cutmaster model that works best for your application. This CNC plasma cutting machine is compatible with automatic torches, but not manual ones.

The PT-44AH-W comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive.

PT-48AH-W - CNC Plasma Table

With variable height control, the PT-48AH-W makes perfect cuts in uneven material. This CNC plasma table comes assembled with a heavy steel frame and includes design software.

Features:

• 60 x 100 inch working area.
• Runs on 220-volt single-phase power, so it will work at most sites in North America.
• Customers love the design software package (more details below), which takes just a few minutes to learn.
• You can control the X, Y, and Z axes using the integrated panel on the podium.
• Automatic height control is integrated into the operator’s panel, eliminating secondary systems found on many other tables.
• Operators podium provides space for plasma power unit even while cutting.
• If the material is uneven or puckers under the heat of the torch, the variable height control will rise or lower in real time while cutting.
• X, Y, and Z axes are controlled by quality stepper motors, allowing for fast and fluid movement.
• Fully enclosed wires and electronics prevent snags and tangles.
• Made of heavy-gauge boxed steel, this CNC plasma cutting machine can easily support large, thick industrial-sized sheets of metal.
• Steel frame will remain straight and accurate over the years—unlike competing plasma tables with aluminum frames, which will warp from heat.
• Ground, hardened, and polished square rails combined with linear orbital bearings add impressive strength to the machine.
• Arrives pre-built at your shop, so you don’t have to spend hours putting it together and risk misalignment.
• Integrated water table helps control smoke and dust created while cutting to help keep your shop clean.
• To get started just:
  • Uncrate the machine.
  • Add a plasma system, power, and a clean, dry air supply.
  • Fill tank with water.
• Industrial plasma cutter Covered by a 1-year parts warranty.
• We keep most replacement parts in stock for quick shipping.
• You can depend on lifetime technical support by phone from our team of knowledgeable reps.

Plasma torch systems sold separately. We’ll let you choose the Thermal Dynamics Cutmaster model that works best for your application. This CNC plasma cutting machine is compatible with automatic torches, but not manual ones.

The PT-48AH-W comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive.

Our PT-105HD-W includes a water bath and has the structural strength to handle 5’ x 10’ sheets. Automatic height detection is ideal for production runs. It arrives nearly fully assembled and comes with software.

Features:

• Runs on 220-volt single-phase power.
• Includes integrated water bath for cooler cutting and less airborn mess.
• Control the X, Y, and Z axis movement from the sturdy podium with large console screen and keypad.
• Includes easy-to-learn design software that you can load into any basic PC (more details below).
• Console offers a pre-loaded library of shapes that you can resize and alter at the table without a computer.
• Automatic height detection on the Z-axis makes perfect cuts in corrugated or uneven materials.
• Panasonic brushless servo motors, controlled by Panasonic® servo motion controllers, drive the gantry.
• Industrial-grade gantry travel system for the X, Y and Z axis made from extremely rigid structural steel.
• Gantry can move out of the way for a full 10-foot sheet during loading, minimizing the chance of machine damage.
• High gantry (one of the highest in the industry) lets you clearly see its movement for better adjustment and control.
• Axes ride on heavy-duty Hiwin square rails.
• Wipers on rails keep welding dust out of the slide for a smooth transfer without noisy friction caused by dirt build-up.
• Weigh an impressive 4000 lbs.
• Fully-welded boxed tubing construction can easily support the weight of maximum capacity material.
• Steel framework will hold its shape and stay accurate for decades, unlike many competitors’ aluminum frames, which buckle and warp under heat.
• 80 percent Pre-built plasma table saves you time and effort.
• Covered by a 1-year parts warranty.
• You’ll benefit from lifetime technical support by phone. Call up one of our experienced reps whenever you need troubleshooting.

Plasma torch systems sold separately. We’ll let you choose the Thermal Dynamics Cutmaster model that works best for your application. This table is compatible with automatic torches, but not manual ones.

The PT-105HD-W comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive.