Baileigh SBR-1220 3 in 1 Combination She

Shear Brake Roll SBR-1220

The SBR-1220 shear brake roll is great for the home shop that needs a machine to do multiple things but not take up a lot space.  Included in the SBR-1220 is a metal shear, press brake and slip roll.  The SBR-1220 has the capacity to work up to 20 gauge mild steel and 16 gauge aluminum in widths up to 12 inches wide making it perfect for those small jobs.

If boxes are one of the requirements for the job then the SBR-1220 press brake will do the trick because of its adjustable fingers on the top beam.   The SBR-1220 has a maximum bend angle of 90 degrees and a handy back gauge for repeatability. 

The slip roll portion of the SBR-1220 has hardened and polished shafts for long life.  It also has three wire grooves for forming wire perfectly.  The 20 gauge capacity carries over to the roll and the shear portion of the machine as well.  For shearing a spring loaded hold down is a nice feature that will save a lot of time and waste.

Like all Baileigh Industrial shear brake and roll machines, the SBR-1220 is in stock for quick shipment.  for more information, please contact a member of Southern-Tools knowledgeable representative.

3 in 1 Combination Machine SBR-3020

  Manual and Hydraulic Plate Roll and Slip Roll Catalog

The SBR-3020 3-in-1 combination machine is perfect for small shops that have low production runs or have a lot of one off projects.  It combines a metal shear, press brake and slip roll into one machine that uses up little floor space.  The SBR-3020 has the capacity to work up to 20 gauge mild steel and 16 gauge aluminum in widths up to 30 inches wide.

The vertical press brake portion of the SBR-3020 has a maximum bend angle of 90 degrees with adjustable fingers on the top beam to easily assist with making any size boxes.  The slip roll portion has three wire grooves, and can form rolls down to 1.54 inch in diameter.  For shearing a handy spring assist hold down helps reduce deformation of the cut.  To round out this package a handy back gauge is included for repeatability.

For further information on The SBR-3020 3-in-1 combination machine, please call a representative.

3-in-1 Shear Brake Roll Machine SBR-4020

Baileigh Industrials SBR-4020 combination shear, brake and roll has a very small floor plan that can be bench or stand mounted. It combines a metal shear, a press brake and a slip roll all into one machine making it perfect for those small sheet metal shops or garage shops with limited space.

The SBR-4020 can shear, brake, or roll up to 20 gauge mild steel and 16 gauge aluminum, with material that is up to 40 inches wide. The manual press brake can bend up to 90 degrees in sheet metal.  The upper beam of the press brake has hardened adjustable dies that allows the fabricator to make certain boxes and pans.  The manual metal shear can cut at full capacity across the entire width of the machine. The manual slip roll has hardened rolls with three wire grooves for small round stock. A back gauge is also included to help with repeatability.

Like all Baileigh combination shear, brake and roll machines, it offers years of use at a very affordable price.  Contact a representative for more information.

Shear Brake and Roll SBR-5220

Manual and Hydraulic Plate Roll and Slip Roll Catalog

Have a small shop but still want the ability to work with 4ft wide sheets of sheet metal?  Take a look at the SBR-5220 from Baileigh Industrial.  The SBR-5220 manual press brake and shear also has a slip roll feature making this machine a combination 3-in-1 shear brake roll. This model has a maximum capacity of 20 gauge mild steel and 16 gauge aluminum over its entire 52 inch width.

The manual press brake has a hardened single-vee bottom die and the upper beam as removable and movable hardened finger dies.  The movable fingers are in varying widths so the operator can move them around to make boxes and pans in varying sizes.  The manual metal shear can cut 20 gauge mild steel across the entire width of the machine.  The bottom and top shear blades are hardened and reversible for long life.  The manual slip roll has hardened bottom and top roll and there are also three wire grooves to roll round rod.  Rolls can be formed to a minimum diameter of 1.7 degrees.

Like all Baileigh Industrial machines the SBR-5220 is built for years of use in any condition and the price makes this machine a great value.  For more information on the SBR-5220 contact a representative today.