Baileigh Tube and Pipe Notchers

Made in United States

If you are looking for a high quality top rated abrasive tube notcher made in the USA.  Then look no further, the TN-600 from Baileigh Industrial is just what you are looking for.  This abrasive tube notcher is a beast when it comes to chewing up metal.    The TN-600 has a powerful 5hp motor that notches at full capacity with ease and only requires 220 volts of single phase power, so it can be used in almost all fabrication shops. It features a 6 x 79 inch belt that spins at 5400 feet per minute.  The large 6 inch belt width allows it to notch up to 3 inch OD tubing at 60 degrees with optional mandrels.  Many sizes of mandrels can be bought separately and are almost always in stock.

The vise of the TN-600 has V-Jaws for a tight grip of the material and is perfect for light gauge to heavy gauge material. The vice is also self centering vise so the material can be changed over quickly and start in the proper position on the belt.  The material is fed into the belt on the TN-600 by a smooth rail system.  The system has an adjustable stop for repeatability.  The vise also features a large degree dial to reference the degree of the notch more easily.

Made in United States

The TN-700 Tube and Pipe Notcher is a great alternative to tying up your vertical mill with that pesky tube and pipe notching.

• Made in the USA.
• 2 hp motor runs on 115-volt power. You can operate it almost anywhere, including in the field.
• Notches up to 60 deg.
• Inverter driven variable speeds allow for the optimum milling speed that balances cutting power with long machine life and low wear and tear.
• Digital readout for RPM, included
• Included speed chart helps dial the perfect speed for your cut.
• Vise adjusts in just about every way possible, featuring X- and Y-axis control to ensure a good cutting position.
• Degree or angle-finder makes it simple to check the angle and ensure repeatability.
• If you want a more traditional notch, the cam lock enables you to set your degrees; just move it in either direction to angle the notch.
• Heavy-duty cast iron framework reduces vibration, prolongs machine life, and delivers more accurate results.
• Optional portable cart with wheels, so that when you’re not using the TN-700 you can roll it out of the way.
• Baileigh covers this end mill tube and pipe notcher with a 1-year parts warranty and lifetime technical support by phone.

Recommended for: Structural work, racing and off-road chassis, steam pipe, and many more applications.

Made in United States

If you are a shop that wants the best in tube and pipe equipment, then you have to look at the TN-800 tube and pipe notcher from Baileigh industrial.  This patented (patent No: 6,435,783) design does what no other notch on the market can do; notch tube form 1 to 3 inch OD without having to change tooling, hole saws or mandrels.  The secret is in the eccentric path that the cutter takes as it is notching the tube.  This end mill style notcher uses a very unique design where the operator dials in the OD that they wish to notch to and the tube notcher will change its eccentric path and produce a perfect notch.  This patented feature saves the fabricator thousands of dollars every year in tooling costs.  No other end mill notcher has this profitable feature.

The TN-800 is also built to last here in the USA using heavy duty cast iron for the main framework.  This design reduces vibration and gives better results.  The vise on the TN-800 is also as unique as the machine itself.  It is adjustable in just about every way possible and features x and y axis to ensure good cutting position.

The TN-800 tube and pipe notcher operates on 110 volt power so it can be run almost anywhere, including in the field.  The TN-800 also has a portable cart that has wheels so that when it is not in use it can be rolled out of the way.

Contact a Southern Tool representative for more information.