Metal Cutting Saws: 12"-14" Multi-Angle Saw
Fast Precision Cutting Aluminum, Copper, Brass, Plastic
Economical to own...Economical to Operate
Complete with motor and oiler
Capacity: Nonferrous materials - 3" x 3" or 2" x
4", 45° -3.25" shapes.
Saws: 12"-14" Multi-Angle Saw
1.5 and 3 HP Models
Complete with motor and oiler
|
Product #
|
Description
|
|
1-1/2 HP Models (1 Phase Only)
|
|
510110
|
12" MULTI ANGLE 1.5 HP 115 VOL1 T 1 Ph
|
|
510111
|
12" MULTI ANGLE 1.5 HP 230 VOLT 1 Ph
|
|
3 HP Models (1 and 3 Phase Available)
|
|
510120
|
12" MULTI ANGLE 3 HP 115 VOLT 1 Ph
|
|
510121
|
12" MULTI ANGLE 3 HP 230 VOLT 1 Ph
|
|
510122
|
12" MULTI ANGLE 3 HP 208 VOLT 3 Ph
|
|
510123
|
12" MULTI ANGLE 3 HP 230 VOLT 3 Ph
|
|
510124
|
12" MULTI ANGLE 3 HP 380 VOLT 3 Ph 50 HZ
|
|
510125
|
12" MULTI ANGLE 3 HP 440 VOLT 3 Ph
|
|
510127
|
12" MULTI ANGLE 3 HP 575 VOLT 3 Ph
|
Note: Automatic oiler activated by motor on/off switch
Abrasive Wheels: Dry Reinforced Abrasive Cutting Wheels
Link for Everett Dry Cut Abrasive Blades
All the cutting wheel grades have been developed and extensively tested to produce quality
cuts on a wide range of material alloys, sizes and shapes.
As a manufacturer of abrasive wheels, we have other grades of wet and dry abrasive wheels to meet your specific requirements. Contact us for special diameter, thickness, arbor hole and drive pin
requirements of abrasive wheels.
Fiberglass Internally Reinforced Resinoid Bond Aluminum Oxide Cutting Wheels
Woven fiberglass cloth is molded in the center of the abrasive wheel for break resistance.
|
Grade
|
|
Description of Cutting Wheels
|
|
|
45FG
|
|
For general purpose cutting
|
|
|
|
|
|
|
|
23020FG
|
|
Designed for use on machines with POWERHEAD (automatic wheel feed) where free cutting ability is needed because of constant feed pressure
|
|
|
|
|
|
|
|
2069FG
|
|
Ideal for heavier wall shapes and tubing
|
|
|
|
|
|
|
|
T32 FG
|
|
For cutting thin wall shapes and thin wall tubing
|
|
|
|
|
|
|
|
GTK-7FG
|
|
Excellent for high quality dry cuts on stainless tubing and other thin wall tubing
|
|
Fiberglass Externally Reinforced Cutting Wheels
Woven fiberglass cloth is applied externally on both sides of the abrasive wheel for break resistance.
|
Grade
|
|
Description of Cutting Wheels
|
|
|
45FGE
|
|
For general purpose cutting
|
|
|
|
|
|
|
|
23020FGE
|
|
Designed for use on cutoff saws with POWERHEAD (automatic
wheel feed) where free cutting ability is needed because of constant feed pressure
|
|
|
|
|
|
|
|
2069FGE
|
|
Ideal for heavier wall shapes and tubing
|
|
|
|
|
|
|
|
T32 FGE
|
|
For cutting thin wall shapes and thin wall tubing
|
|
|
|
|
|
|
|
GTK-7FGE
|
|
Excellent for high quality dry cuts on stainless tubing and other thin wall tubing
|
