Hud-Son Oscar Pro Model Sawmills

THE NEW ! Oscar 330 PRO Portable Sawmill The Oscar 330 Pro portable sawmill is stealing the market with its affordability and efficiency. This model is economically priced for any wood cutter and comes stanadard with  a 16 HP  Electric Start and three 7 foot 3 inch welded angle iron ground tracks. This portable sawmill can accommodate a 30 inch diameter log and provide you with all of your lumber needs. Freight FOB Barneveld, NY 13304. Standard Large Lube Tank Standard Track Sweeper

Standard features include:

• 30 inch Capacity (Log Diameter)
• three 7 ft sections of welded 3 inch angle iron track
• log dog assembly
• 23 HP electric start
• 1 1/2 inch Tubular Steel Framing
• Manual Start, Extra Large Blade Lubrication Tank
• Manual Height Adjustment in 1/16 inch increments
• 19 inch Band Wheels
• Hud-Son Guides
• Bottom Board 1 inch Capability
• Powder Coat Finish
• Centrifugal Clutch
• Hud-Son Saw Blades, and Vibration Reducing Lathe cut Pyrathane Bandwheel Belting

Oscar 330 PRO Portable Sawmill
OSC330-23	Oscar 330-PRO 30 in  Capacity (Log Diameter) - 23 HP ** NOW WITH 3X Ground Track 330-PRO

THE NEW ! Oscar 336 PRO Portable Sawmill The Oscar-336 PRO is a great mill for the average and advances sawyers. No matter what your needs for a sawmill might be time always plays a factor in ones needs. You could be under pressure of suppling customers or you just need to finish a project so you can take some time to relax. The Oscar 336 makes quick work of log-to-lumber and slabbing needs. Not only can the Oscar-336 give you impressive performance with the power height adjustment sawmill head performance comes with ease. The Oscar-336 features Hud-son Halo Frame design. This sleek design contributes to the strength and quality that is expected from a Hud-son Forest Equipment product. The Halo Design also accommodates the powerful engine options to keep up with the need performance. A must have around the farm, ranch and woodlots. The Oscar 336 boasts a 23 HP V-twin overhead valve motor allowing you to slice through any wood up to 36 inch in diameter. Want more power? Other engines options include a 35hp and 40hp available motors. The Oscar 336 is available as a ground unit or complete unit on a trailer. The band wheels ride on a heavy-duty 1-1/2 inch shaft supported by two pillow block bearings on each side of the wheel. This configuration distributes the pressure load evenly over the shaft to eliminate premature shaft or bearing failure. We believe so strongly in this we guarantee the main bearings and shafts for 6 YEARS!

Standard Features

Oscar 336 PRO Portable Sawmill
OSC336G-23	The NEW Oscar 336 PRO - 36 in  Capacity (Log Diameter) - 23HP Standard Ground Track Unit, 14 ft - NOW with 3x piece track included
OSC336G-35	The NEW Oscar 336 PRO - 36 in  Capacity (Log Diameter) - 35HP Standard Ground Track Unit, 14 ft - NOW with 3x piece track included

Why buy a Hud-Son Portable Sawmill?
- Top ten reasons why a Hud-son is the right choice

1. DESIGN

   Hud-Son uses a 4-Post head design. This allows for more head stability and reduces the chance for sag or uneven cuts. With an inner H-frame bearing support system, this applies less stress on the bearings and drive shafts. The H-frame uses no camber in the wheels for tracking. Camber causes unnecessary stress which leads to early bearing & shaft fatigue (see photo).

2. SERVICE

   WHEN NEEDED, IT IS SIMPLE. EASY ACCESS TO ALL THE BEARINGS, SHAFTS AND BELTS MAKE ADJUSTMENTS AND SERVICE SIMPLE. BLADE CHANGES ARE EASY, NO REALIGNING OR ADJUSTMENTS TO MAKE.

3. BLADE GUIDES

   HUD-SON USES THEIR VERY OWN GUIDES. WITH SUPPORT ON THE TOP, BOTTOM AND BACK OF THE BLADE, WHERE CAN IT GO? OUR GUIDES LIMIT THE CHANCE OF BLADE WANDER. THE LOWER SUPPORT HOLDS THE BLADE UP AND DECREASES THE CHANCE OF "DIVING", WHILE MOST COMPANIES USE ONLY TOP SUPPORT. YES, WE DO SELL OUR GUIDES SEPARATELY.

4. VALUE

   COMPARE, THERE IS NO OTHER MILL ON THE MARKET THAT HAS STANDARD FEATURES FOR THE PRICE OF A HUD-SON. NO ONE.

5. PAINT

   WE CARE THAT YOU ARE COMPLETELY SATISFIED WITH YOUR RECENT PURCHASE. WE POWDER COAT ALL OUR SAWMILLS, POWDER COATING IS DURABLE JUST LIKE YOUR HUD-SON! EACH PART IS CAREFULLY PREPARED AND COATED TO KEEP YOUR NEWEST INVESTMENT LOOKING LIKE IT, FOR YEARS TO COME.

6. QUALITY ASSURED

   EVERY SINGLE UNIT PASSES A VIGOROUS 28 POINT INSPECTION. EACH SAWMILL IS TESTED WITH WOOD, NOT JUST VISUALLY LOOKED AT. IT IS NOT EASY TO EARN THE RIGHT TO WEAR THE HUD-SON LABEL.

7. AVAILABILITY

   HUD-SON SAWMILLS ARE ALL MANUFACTURED AT OUR FACILITY IN BARNEVELD, NY. OUR SAWMILLS ARE AVAILABLE AT OVER 40 LOCATIONS THROUGHOUT THE U.S., CANADA AND EUROPE. THIS BRINGS SERVICE AND AVAILABILITY CLOSER TO YOU.

8. WARRANTY

   ALL OUR MILLS, SMALL TO LARGE HAVE 2 YEAR LIMITED WARRANTIES. WE STAND BEHIND OUR PRODUCTS. WE DO NOT HIDE BEHIND THE SMALL PRINT.

9. DRIVE LINE

   ALL OUR BANDWHEELS FROM 16 - 30 inch IN SIZE HAVE TIGHT FITTING LATHE CUT PYRATHANE BELTING. THIS COMPLETES THE MATCH AND BALANCE WITH THE WHEEL, BELT, BEARINGS AND SHAFTS. THIS REMOVES THE VIBRATION MILLS WITH LOOSE BELTS HAVE AND IMPROVES THE QUALITY OF YOUR CUT.

10. PORTABILITY

    ALL HUD-SON MILLS ARE PORTABLE, SOME WITH A 4 WHEELER OR GOLF CART, SOME WITH A PICK UP TRUCK, SOME EVEN TWO GUYS CAN CARRY.

    HUD-SON HAS THE ONLY "MILL TO GO" ON THE MARKET. HUD-SON DESIGNS THEIR MILLS WITH YOU THE CUSTOMER IN MIND. WE KNOW THAT YOUR MILL NEEDS TO GO TO CAMP, HOME OR EVEN TO WORK WITH YOU. HUD-SON MILLS WILL MAKE THE TRIP.