Jet Metal Dust Collectors

model
JDC-500B
JDC-501
JDC-510
JDCS-505
WARRANTY

JET Metal Bench Top Dust Collector
414850	JDC-500B JET Bench Top Dust Collector 1/3HP, 115V., Single Phase
414851	Replacement Filter for JDCS-500B
414852	3 inch Hose Wire Clamps 2 per bag
414853	2 inch Hose Wire Clamps 2 per bag
414854	4pcs Swivel Caster Set
JET Metal Cabinet Dust Collector
414700	JDC-501, Cabinet Dust Collector For Metal 115/230V 1PH
414705	Replacement Filters for JDC-501 (Pair)
414710	8ft, 4 inch Diameter Heat Resistant Hose (130 Degrees)
414715	8ft, 4 inch Diameter Heat Resistant Hose (180 Degrees)
414720	8ft, 3 inch Diameter Heat Resistant Hose (130 Degrees)
414725	8ft, 3 inch Diameter Heat Resistant Hose (180 Degrees)
414730	2 inch 2.5M Heat Resistant Hose (130 Degree)
414735	2 inch 2.5M Heat Resistant Hose (180 Degree)
JET Metal Industrial Dust Collector
414900	JDC-510 JET 1500 CFM Industrial Dust Collector 3HP, 220V., 3Phase
414901	Replacement Filter
414902	Replacement Dust Collection Bag
JET Metal Stand Dust Collector
414800	JDCS-505, Metal Dust Collector Stand 115V
414811	2ft 2-1/2 inch Heat Resistant Hose (180 Degree)
414813	2ft, 3 inch Diameter Heat Resistant Hose (180 Degree)
414812	2ft, 2 inch Diameter Heat Resistant Hose (180 Degree)
414815	3 inch to 1-1/2 inch Reducer sleeve for JDCS-505
414820	3 inch to 2 inch Reducer sleeve for JDCS-505
414825	3 inch to 2-1/2 inch Reducer sleeve for JDCS-505
414840	JDCS-505 Replacement Filter
414832	JDCS-505 Universal Adapter Plate for Bench Belt Grinders BGB-142 and BGB-242
414833	JDCS-505 Adapter Plate for BGB-260

JDC-500 Bench Dust Collector 1/3HP, 115V, Single Phase

JDC-500B Bench Dust Collector 1/3HP, 115V, Single Phase

JETs new Bench Dust Collector is great for collecting abrasive dust from Belt and Disc finishing and grinding machines in your home or small shop. Chips and dust collect into a metal drawer that is easy to clean. The convenient optional casters allow for use throughout your shop. Enhance the health and safety levels in your shop with JET.

Features:

All steel construction
CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
Easy to change exhaust filter
Non-sparking aluminum housing and fan blade
Portable on 4 casters and 2 handles for ease of movement
Quite, effective dust collection method
Simple and easy to clean-out chip and dust drawer

For DRY work ONLY!
Heat resistant hoses required for connection to metalworking machine.

Specifications
Modelnumber		JDC-500B
Stock number		414850
Motor and electricals
Motor type		totally enclosed industrial
Horsepower		1/3 HP(0.25 kW)
Motor phase		single
Motor voltage		115V
Cycle		60 Hz
Listed FLA (full load amps)		3.6A
Run capacitor		10F 350VAC
Motor speed		3,420 RPM
On/off switch		Toggle switchwith removable key
Power cord		16AWGx3C, 6 ft., SJT
Power plug		5-15P, 125V/15A, installed
Recommended minimum circuit size		15A
Sound emission without load		75 dB at 3 ft.
Impeller
Impeller diameter		8 in. (203 mm)
Impeller type		Radial fin
Impeller material		Steel, non-sparking
Performance
Blower only	Air flow at 4 in.	410 CFM (11.6 cmm)
	Air velocity at 4 in.	4,684 FPM (23.8 m/s)
	Static pressure loss (WC)	2.13 inH2O (54 mmH2O)
	Maximum static pressure loss (WC)	4.02inH2O (102mmH2O)
Assembled unit with exhaust filter installed	Air flow at 3in.	176CFM (5.0 cmm)
	Air velocity at 3in.	3,583FPM (18.2m/s)
	Static pressure loss (WC)	1.18 inH2O (30 mmH2O)
	Maximum static pressure loss (WC)	3.74 inH2O (95 mmH2O)
Filter
Filter size		11-25/32 x 10-15/32 x 1-13/16 in. (299 x 266 x 30 mm)
Filter frame material		Sheet metal
Filter style		composite (double material)
Filter expanded area		20.28 in2
Filter inside material		Anti-spark/fireproof (MERV 11)
Filter outside material		Spunbond polyester (MERV 13)
Cabinet
Foot print (W x D)		14-9/32 x 19-5/8in. (363 x 499 mm)
Inletport diameter		3in. (76mm)
Sheet metal thickness		18 ga. (1.2 mm)
Drawer capacity		14.65 in3(2.4 L)
Dimensions
Assembled dimensions (W x D x H)		14-9/2 x 19-5/8 x 16-15/16 in. (363 x 499 x 430 mm)
Shipping dimensions L x W x H		22-5/8 x 14-9/16 x 19-1/2in.(575 x 370 x 495mm)
Weights
Net weight		49 lb. (22.2 kg)
Shipping weight		53 lb. (24 kg)

Click here to download manual

JDC-501, Cabinet Dust Collector For Metal 115/230V 1Ph

JETS new Metal Dust Collector is great for collecting abrasive dust from belt and disc finishing and grinding machines. Chips and dust collect into a metal drawer that is easy to clean, and no cloth bags! Two 3 inch chutes allows you to attached two different machines, and portable casters allows for use throughout your shop. Enhance the health and safety levels in your shop with JET innovation.

Features:

Easy to change air filter
Easy to empty clean-out drawer
Non-sparking aluminum housing and fan blade
Not to be used with Surface Grinders
Portable on 4 casters and 2 handles for ease of movement
Quiet, effective dust collection method

For DRY work ONLY!
Heat resistant hoses required for connection to metalworking machine.

Specifications
Part Number	414700
Maximum CFM	490
Maximum Hose Velocity (SFPM)	5610
Motor (HP)	1-1/2 HP, 115V, 1 Ph
Filter (WxLxD/in.)	19 x 9-1/2 x 1-3/4
Filter Efficiency	99 percent at 5 micron
dba at 5'	75
Hose Size (WxL/in.)	2 inlets at 3 inch
Height	33 inch
Width	28 inch
Length	32 inch
Net Weight	157 pound

Click here to download manual

JDC-510 1500CFM Industrial Dust Collector 3HP, 220V, Single Phase

JETs new 1500CFM Industrial Dust Collector is great for collecting abrasive dust from Belt and Disc finishing and grinding machines. Chips and dust collect into a metal drawer that is easy to clean. Three 3 dust chutes allows you to attached to multiple machines. The convenient casters allow for use throughout your shop. Enhance the health and safety levels in your shop with JET.

Features:

All steel construction
CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
Easy to change exhaust filter
Non-sparking aluminum housing and fan blade
Portable on 4 casters and 2 handles for ease of movement
Quiet, effective dust collection method
Simple and easy to clean-out chip and dust drawer
For DRY work ONLY!
Heat resistant hoses required for connection to metalworking machine.


Maximum CFM	490
Maximum Hose Velocity (SFPM)	5610
Filter Type	Anti-Spark / Fireproof
Sound Rating (Db.)	75
Electrics	1-1/2HP, 115V, 1Ph
Overall Dimensions (L x W x H) (In.)	30-5/8 x 20-7/8 x 29
Net Weight (Lbs.)	212
Gross Weight (Lbs)	251

Click here to download manual

JDCS-505, Metal Dust Collector Stand 115V

JETs new metal dust collection stand is the first of its kind. Packed with innovative safety features, this stand comes with two added 115V outlets, removable water pots to keep your work piece cool, and a metal drawer for dust and debris collection. The universal mounting system is compatible for any brand bench grinder and with an addition of the universal adapter plate it is compatible with most bench top belt and disc machines.

Features:

ANY BRAND bench top belt, disc or combination machine can be mounted using the optional Universal Adapter Plate (414830)
Chips and dust collect into a metal drawer that is easy to empty, and the high temperature filters are replaceable
CSA/CUS Certified
Four Adjustable Leveling Pads
Heavy-Duty 16 gauge steel construction
Large On/off switch with safety key
Non-sparking aluminum fan blade and housing eliminates the risk of fire during the collection of abrasive dust and chips
Turbo fan design provides a maximum of 472 CFM of air movement for effective metal dust collection
Two removable water pots gives you the features of a pedestal stand along with all the benefits of a dust collector
Universal Metalworking Dust Collection Stand, fits ANY BRAND bench grinder and bench top belt and disc sanders
For DRY work ONLY!
Heat resistant hoses required for connection to metalworking machine.

Specifications
STOCK NUMBER	414800
Model Number	JDCS-505
Filter Efficiency	90 degree at 50 Microns
Sound Rating (Db.)	75 db at 10 Ft
Static Pressure (Wc.)	748
Filter Size (W x L x D) (In.)	6-3/4 x 2-5/8 x 13-1/2
Maximum CFM	472
Maximum Hose Velocity (SFPM)	3,465
Max. Static Pressure (Wc.)	2,440
Port Size	2 Inlets at 3 inch
Plug Requirements	20P, 125V/20A
Motor	1/2 HP, 115V, 1 Ph
Overall Dimensions (L x W x H) (In.)	15-1/2 x 16 x 32-1/4
Weight (lbs.)	110

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.


JDC-500B Bench Metal Dust Collector	JDC-501, Cabinet Metal Dust Collector	JDC-510 1500CFM Metal Industrial Dust Collector	JDCS-505, Metal Dust Collector Stand