JET JMD Milling/Drilling Machines

CALL 1-800-458-3687 FOR FREE FREIGHT

Some conditions may apply but never surprise handling charges when ordering

pictures


JMD-15 Mill/Drill With R-8 Taper	JMD-18 Mill/Drill With R-8 Taper	JMD-18PFN Mill/Drill With Power Downfeed	JMD-40GH Geared Head Mill Drill	JMD-45GH Geared Head Square Column Mill Drill

LIMITED OFFER - FREE STAND WITH EVERY JET MILL/DRILL WHILE SUPPLIES LAST = $399.00 VALUE

models
JMD-15
JMD-18
JMD-18PFN
JMD-40
JMD-45G
Warranty

JET JMD-15 MILLING AND DRILLING MACHINES, BENCH TOP
350017	JMD-15 Mill/Drill With R-8 Taper 115/230V 1Ph
JET JMD-15 PACKAGES
350132	JMD-15 Mill/Drill With NEWALL NMS300 DRO
350125	JMD-15 Mill/Drill With NEWALL DP700 DRO
350116	JMD-15 MILL/DRILL WITH 203 DRO
JET JMD-18 MILLING AND DRILLING MACHINES, BENCH TOP
350018	JMD-18 Mill/Drill With R-8 Taper 115/230V 1Ph
JET JMD-18 PACKAGES
350119	JMD-18 Mill/Drill With X-Axis Table Powerfeed
350133	JMD-18 Mill/Drill With NEWALL NMS300 DRO
350134	JMD-18 Mill/Drill With Newall NMS300 DRO and X-Axis Table Powerfeed
350126	JMD-18 Mill/Drill With NEWALL DP700 DRO
JET JMD-18PFN MILLING AND DRILLING MACHINES, BENCH TOP
350020	JMD-18PFN Mill/Drill With Power Downfeed 115/230V 1Ph
JET JMD-18PFN PACKAGES
350135	JMD-18PFN Mill/Drill With NEWALL NMS300 DRO
350136	JMD-18PFN Mill/Drill With NEWALL NMS300 DRO and X-Axis Table Powerfeed
350128	JMD-18PFN Mill/Drill With NEWALL DP700 DRO
350129	JMD-18PFN Mill/Drill With NEWALL DP700 DRO and X-Axis Table Powerfeed
JMD-18 SERIES ACCESSORIES, NOT INSTALLED
350045	CS-18, Floor Stand For Mill/Drills
350083	X-Axis Table Powerfeed for JMD-Series Mill/Drill
JET JMD-40 GEARED HEAD MILLING AND DRILLING MACHINES
351040	JMD-40GH Geared Head Mill Drill
351041	JMD-40GHPF Geared Head Mill Drill with Power Downfeed
JET JMD-40 GEARED HEAD MILL DRILL PACKAGES
351140	JMD-40GH Geared Head Mill Drill with Newall DP700 2Axis DRO
351141	JMD-40GH Geared Head Mill Drill with Newall DP700 2Axis DRO & X-Powerfeed
351142	JMD-40GHPFGeared Head Mill Drill with Power Downfeed and Newall DP700 2-Axis DRO
351143	JMD-40GHPF Geared Head Mill Drill with Power Downfeed and Newall DP700 2-Axis DRO and X-Powerfeed
351144	JMD-40GH Geared Head Mill Drill with Newall NMS300 2Axis DRO
351145	JMD-40GH Geared Head Mill Drill with Newall NMS300 2Axis DRO and X-Powerfeed
351146	JMD-40GHPF Geared Head Mill Drill with Power Downfeed and Newall NMS300 2-Axis DRO
351147	JMD-40GHPF Geared Head Mill Drill with Power Downfeed and Newall NMS300 2-Axis DRO and X-Powerfeed
JET JMD-45 GEARED HEAD SQUARE COLUMN MILL DRILLS
351045	JMD-45GH Geared Head Square Column Mill Drill
351046	JMD-45GHPF Geared Head Square Column Mill Drill With Power Downfeed
351050	JMD-45VSPF Variable Speed Square Column Geared Head Mill Drill
351051	JMD-45VSPFT Variable Speed Geared Head Square Column Mill Drill with Power Downfeed
JET JMD-45 GEARED HEAD SQUARE COLUMN MILL DRILL PACKAGES
351150	JMD-45GH Geared Head Square Column Mill Drill with Newall DP700 2-Axis DRO
351151	JMD-45GH Geared Head Square Column Mill Drill with Newall DP700 2-Axis DRO and X-Powerfeed
351152	JMD-45GHPF Geared Head Square Column Mill Drill with Power Downfeed with DP700 2 Axis DRO
351153	JMD-45GHPF Geared Head Square Column Mill Drill with Power Downfeed with DP700 2 Axis DRO and X-Axis Powerfeed
351154	JMD-45VSPF Variable Speed Square Column Geared Head Mill Drill with Newall DP700 2 Axis DRO
351155	JMD-45VSPF Variable Speed Square Column Geared Head Mill Drill with Newall DP700 2 Axis DRO and X-Axis Powerfeed
351156	JMD-45VSPFT Variable Speed Geared Head Square Column Mill Drill with Power Downfeed and Newall NMS300 2-Axis DRO
351157	JMD-45VSPFT Variable Speed Geared Head Square Column Mill Drill with Power Downfeed and Newall NMS300 2-Axis DRO and X-Axis Powerfeed
351158	JMD-45GH Geared Head Square Column Mill Drill with Newall NMS300 2-Axis DRO
351159	JMD-45GH Geared Head Square Column Mill Drill with Newall NMS300 2-Axis DRO and X-Powerfeed
351160	JMD-45GHPF Geared Head Square Column Mill Drill with Power Downfeed with NMS300 2 Axis DRO
351161	JMD-45GHPF Geared Head Square Column Mill Drill with Power Downfeed with NMS300 2 Axis DRO and X-Axis Powerfeed
351162	JMD-45VSPF Variable Speed Square Column Geared Head Mill Drill with Newall NMS300 2 Axis DRO
351163	JMD-45VSPF Variable Speed Square Column Geared Head Mill Drill with Newall NMS300 2 Axis DRO and X-Axis Powerfeed
351164	JMD-45VSPFTVariable Speed Geared Head Square Column Mill Drill with Power Downfeed and Newall NMS300 2-Axis DRO
351165	JMD-45VSPFT Variable Speed Geared Head Square Column Mill Drill with Power Downfeed and Newall NMS300 2-Axis DRO and X-Axis Powerfeed

The Jet JMD-15, R-8 Taper, 1HP, 1Ph, 115/230V
has a 2 Year warranty

Download pdf manual

MILLING/DRILLING MACHINES
One-piece cast iron column for added support
Belt cover quick slide latch allows faster belt adjustment to change spindle speeds
Base taper allows for easier clean-up
Larger hand wheel knobs
UL Listed motor
Extra large worktable
Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth
New positive quick-stop knob and easy-to-read internal depth gauge (external on JMD-15)
360? head swivel
Heavy-duty power downfeed with manual fine feed (JMD-18PFN)
Three power down feeds (JMD-18PFN .004, .007, .01 inch)
Worklamp
Adjustable carbide facemill
Drill press angle vise
1/2 drill chuck, chuck arbor
Draw bar

JET JMD-15 / 15 in MILL DRILL / 350015
Drilling Capacity (In.)	1
Face Mill Capacity (In.)	2-1/2
End Mill Capacity (In.)	1/2
Swing (In.)	14-1/2
Max Distance Spindle to Table (In.)	15

Spindle Taper (In. x TPI)	R-8
Spindle Travel (In.)	3-1/2
Quill Diameter (In.)	2-7/16
Column Diameter (In.)	3-5/8
Number of Spindle Speeds	12
Range of Spindle Speeds (RPM)	110 - 2,580
Table Size (L x W) (In.)	7-1/2 x 23
Table Longitudinal Travel (In.)	14
Work Table Weight Capacity (Lbs.)	350
T-Slots Number and Size (In.)	4, 9/16
T-Slot Centers (In.)	1-13/16
Base Dimensions (In.)	12-1/2 x 19-3/4
Motor (HP)	1 HP, 115/230V, 1Ph
Overall Dimensions (L x W x H) (In.)	38 x 37-1/2 x 42
Weight (Lbs.)	440

The JDM-18 Mill Drill is one of a kind. The one piece cast iron column adds support to tackle various drilling applications. Each mill drill comes equipped with a draw bar, adjustable carbide facemill, worklamp, 360 degree swivel head, and extra large worktable. Did we mention the JDM-18 is UL listed

The Jet JMD-18, R-8 Taper, 2HP, 1Ph, 115V/230V
has a 2 Year warranty

Download pdf manual

MILLING/DRILLING MACHINES
One-piece cast iron column for added support
Belt cover quick slide latch allows faster belt adjustment to change spindle speeds
Base taper allows for easier clean-up
Larger hand wheel knobs
UL Listed motor
Extra large worktable
Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth
New positive quick-stop knob and easy-to-read internal depth gauge (external on JMD-15)
360 degree head swivel
Heavy-duty power downfeed with manual fine feed (JMD-18PFN)
Three power down feeds (JMD-18PFN .004, .007, .01 inch)
Worklamp included
Adjustable carbide facemill
Drill press angle vise
1/2 drill chuck, chuck arbor
Draw bar included

JMD-18 / 18 in MILL DRILL / 350018
Drilling Capacity (In.)	1-1/4
Face Mill Capacity (In.)	3
End Mill Capacity (In.)	3/4
Swing (In.)	15-7/8
Max Distance Spindle to Table (In.)	18

Spindle Taper (In. x TPI)	R-8
Spindle Travel (In.)	5
Quill Diameter (In.)	3
Column Diameter (In.)	4-1/2
Number of Spindle Speeds	12
Range of Spindle Speeds (RPM)	150 - 3,000
Table Size (L x W) (In.)	9-1/2 x 32-1/4
Table Longitudinal Travel (In.)	20-1/2
Work Table Weight Capacity (Lbs.)	400
T-Slots Number and Size (In.)	4, 5/8
T-Slot Centers (In.)	1-13/16
Base Dimensions (In.)	15-3/4 x 23-3/4
Motor (HP)	2 HP, 115/230V, 1Ph
Overall Dimensions (L x W x H) (In.)	47 x 40 x 51
Weight (Lbs.)	660

The JET JMD-18PFN Mill Drill with built in downfeed boasts a 2 HP motor on a one-piece cast iron column. The JMD comes equipped with a worklamp, heavy-duty power downfeed with manual line feed, adjustable carbide facemill, and also has a UL listed motor.

The Jet JMD-18PFN, Built-in Power Downfeed, 2HP, 1Ph, 230V Only
has a 2 Year warranty

Download pdf manual

MILLING/DRILLING MACHINES
One-piece cast iron column for added support
Belt cover quick slide latch allows faster belt adjustment to change spindle speeds
Base taper allows for easier clean-up
Larger hand wheel knobs
UL Listed motor
Extra large worktable
Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth
New positive quick-stop knob and easy-to-read internal depth gauge (external on JMD-15)
360 degree head swivel
Heavy-duty power downfeed with manual fine feed (JMD-18PFN)
Three power down feeds (JMD-18PFN .004, .007, .01 inch)
Worklamp
Adjustable carbide facemill
Drill press angle vise
1/2 drill chuck, chuck arbor
Draw bar

JMD-18PF / 18 IN MILL DRILL WITH POWER DOWNFEED / 350020
Powerfeed	Downfeed
Drilling Capacity (In.)	1-1/4
Face Mill Capacity (In.)	3
End Mill Capacity (In.)	3/4
Swing (In.)	15-7/8

Max Distance Spindle to Table (In.)	26
Spindle Taper (In. x TPI)	R-8
Spindle Travel (In.)	5
Spindle Travel Auto (In.)	4-1/4
Quill Down Feed Rates (IPR)	0.0047â, 0.007â, 0.001â
Quill Diameter (In.)	3
Column Diameter (In.)	4-1/2
Number of Spindle Speeds	12
Range of Spindle Speeds (RPM)	150 - 3,000
Table Size (L x W) (In.)	9-1/2 x 31-3/4
Table Longitudinal Travel (In.)	20-1/2
Work Table Weight Capacity (Lbs.)	400
T-Slots Number and Size (In.)	4, 5/8
T-Slot Centers (In.)	1-13/16
Base Dimensions (In.)	15-3/4 x 23-3/4
Motor (HP)	2 HP, 230V Only, 1 Ph
Overall Dimensions (L x W x H) (In.)	47 x 40 x 51
Weight (Lbs.)	700

JMD-40GH Geared Head Mill/Drill has a 2 Year warranty

Heavy-duty design allows for a variety of precision drilling applications
Full power to the cutting tools through 6 speed geared head
CSA/CUS: Following strict guidelines and electrical requirements, this JET Mill Drill is CSA/CUS certified
Spindle guard
Work Lamp
Calibrated fine down feed built in
Easy to read internal depth gauge
Head tilts left and right 90 deg
Rapid spindle speed changes through quick-select gear shift levers
Forward/reverse switch
Milling table allows for movement
R8 spindle allows use of all mill tooling

Detailed Specifications
Model Number	JMD-40GH
Drilling Capacity (In.)	1-1/2
Face Mill Capacity (In.)	4
End Mill Capacity (In.)	3/4
Swing (In.)	21
Max Distance Spindle to Table (In.)	15-3/4
Spindle Taper (In. x TPI)	R-8
Spindle Travel Manual (In.)	5
Spindle Auto Travel (In.)	-
Quill Diameter (In.)	3
Column Diameter (In.)	4-1/2
Number of Spindle Speeds	6
Range of Spindle Speeds (RPM)	65 - 1550rpm
Table Size (L x W) (In.)	32-1/4 x 9-1/2
Table Longitudinal Travel (In.)	20-1/2
T-Slots Number and Size (In.)	4 and 5/8 x1
Base Dimensions (In.)	24-1/4 x 15-15/16
Motor (HP)	1-1/2HP, 115/230V, 1Ph
Overall Dimensions (L x W x H) (In.)	28 x 39-1/4 x 42-1/2
Weight (Lbs.)	628

Click here to download manual

The heavy-duty JMD-45GH Square Column Geared Head Mill Drill is engineered to deliver the rigidity needed to perform a variety of precision drilling applications in high intensity environments.

Features:

Heavy-duty design allows for a variety of precision drilling applications
Full power to the cutting tools through 6 speed geared head
Square column with dovetail ways
CSA/CUS: Following strict guidelines and electrical requirements, this JET Mill Drill is CSA/CUS certified
Spindle guard
Work Lamp
Calibrated fine down feed built inEasy to read internal depth gauge
Head tilts left and right 90 deg
Rapid spindle speed changes through quick-select gear shift levers
Forward/reverse switch
Milling table allows for movement
R8 spindle allows use of all mill tooling
Mill Drill Stand, p/n 320020, shown in some images, is optional

Specifications
Drilling Capacity (In.)	1-1/2
Face Mill Capacity (In.)	4
End Mill Capacity (In.)	3/4
Swing (In.)	19-11/16
Max Distance Spindle to Table (In.)	18-1/8
Spindle Taper (In. x TPI)	R8
Spindle Travel (In.)	5
Quill Diameter (In.)	3
Column Diameter (In.)	7-7/8 x 7-5/8 Square
Number of Spindle Speeds	6
Range of Spindle Speeds (RPM)	65-1550
Table Size (L x W) (In.)	9-1/2 x 32-1/4
Table Longitudinal Travel (In.)	20-1/2
T-Slots Number and Size (In.)	4 - 5/8
Base Dimensions (In.)	26-11/16 x 15-15/16
Motor (HP)	1-1/2HP, 115/230V, 1Ph
Overall Dimensions (L x W x H) (In.)	29 x 36 x 50
Weight (Lbs.)	794

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JetÃÂ® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.