Metalpro Hydraulic Tubeand Pipe Benders

models
MP9000
MP9500

Machines - Ironworkers and Benders
MP9000	12 Ton Pipe and Tube Bender - 90 Degree Bender (Round Pipe and tube between 1/2 inch-2 inch), 3/4 HP, 110v, Wieight 310 lbs, Dims: 27 inch X 26 inch X 43 inch
MP9500	13 Ton Pipe and Tube Bender - 180 Degree Bender (Round Pipe and tube between 1/2 inch-2 inch)3/4 HP, 110v, Wieight 400 lbs, Dims: 27 inch X 26 inch X 43 inch

Pipe Bender Dies for MP9000 and MP9500
MP9020	1/2 BENDER DIE
MP9019	3/4 BENDER DIE
MP9018	1 BENDER DIE
MP9017	1-1/4 BENDER DIE
MP9016	1-1/2 BENDER DIE
MP9015	2 BENDER DIE
MP9030	1/2 - 2 PIPE DIE SET
MP9034	1/2 OD TUBING DIE 1.50 inch BEND RADIUS
MP9036	5/8 OD TUBING DIE - 2.94 inch BEND RADIUS
MP9038	3/4 OD TUBING DIE - 2.94 inch BEND RADIUS
MP9040	7/8 OD TUBING DIE - 3.68 inch BEND RADIUS
MP9042	1 OD TUBING DIE - 4.55 inch BEND RADIUS
MP9044	1-1/8 OD TUBING DIE - 4.55 inch BEND RADIUS
MP9046	1-1/4 OD TUBING DIE - 5.22 inch BEND RADIUS
MP9048	1-3/8 OD TUBING DIE - 5.81 inch BEND RADIUS
MP9050	1-1/2 OD TUBING DIE - 5.81 inch BEND RADIUS
MP9052	1-5/8 OD TUBING DIE - 6.65 inch BEND RADIUS
MP9054	1-3/4 OD TUBING DIE - 6.65 inch BEND RADIUS
MP9056	1-7/8 OD TUBING DIE - 6.65 inch BEND RADIUS
MP9058	2 OD TUBING DIE - 8.31 inch BEND RADIUS

12 TON PIPE & TUBE BENDER - 90 DEGREE BENDER (ROUND PIPE AND TUBE BETWEEN 1/2-2), 3/4 HP, 110V, WIEIGHT 310 LBS, DIMS: 27 X 26 X 43

The METALpro MP9000 offers 90 degrees of bending capabilities in a compact package. This machine lets you conquer a wide variety of jobs with 12 tons of power and it all run off 110 volts! We have dies ranging from 1/2 to 2 inch pipe/tubing for anything you need to throw at it.

Specifications
Model	MP9000
Maximum Bend	90 deg
Motor	110V, 3/4 HP
Size Range	1/2 - 2 inch
Operating Weight	250 lb
Strokes Per Minute	2
Bending Force	12 US Tons
Hydraulic Oil Capacity	0 gal
Dimensions	27 in x 26 in x 43 in

13 TON PIPE & TUBE BENDER - 180 DEGREE BENDER (ROUND PIPE AND TUBE BETWEEN 1/2-2)3/4 HP, 110V, WIEIGHT 400 LBS, DIMS: 27 X 26 X 43

When you need one bender to do it all, our METALpro MP9500 is your solution. Have the capability to bend round and square pipe/tubing, conduit, and round rod 180 degrees at your fingertips with this 110 volt bender.

Specifications
Model	MP9500
Maximum Bend	180 deg
Motor	110V, 3/4 HP
Size Range	1/2 - 2 inch
Operating Weight	325 lb
Strokes Per Minute	2
Bending Force	12 US Tons
Hydraulic Oil Capacity	1 gal
Dimensions	41 in x 24 in x 66 in


12 Ton Pipe and Tube 90 Deg Bender (Round Pipe and Tube Between 1/2-2) 3/4 HP, 110V	13 Ton Pipe and Tube 180 Deg Bender (Round Pipe and Tube Between 1/2-2) 3/4 HP, 110V