Click here to download manual
The new POWERMATIC PM701 Benchtop Mortiser features an in-line depth stop which allows the user to stop at preset depths without racking the mortiser bit to the base. Its heavy-duty reversible
handle is so versatile that it can be changed from one side to the other quickly and easily and requires no tools to do so. The stock hold down features a specially designed double lock system. One
locks from the side, the other locks from the top, to completely eliminate any slippage when removing the chisel from the work piece. This hold-down is also reversible to allow stock from 0 to 5"
thick to be captured underneath it. The new POWERMATIC 701 Benchtop Mortiser has a quick-action cam lock that will quickly lock the fence into position with one 90 degree movement. This lock also
features lock nuts, so once set they will not have to be continually adjusted. Set-up has never been easier or more precise. The new POWERMATIC 701 Benchtop Mortiser features an integrated bit and
chisel spacer system. These two spacers are used to accurately and quickly account for the space needed between the bit and chisel during set-up. Large work surfaces in the table and fence allow
for more stability and accurate cuts. The new mortiser also includes a large hinged chuck door with magnetic catch. This unique element allows the user to easily access the drill chuck with the
standard 4 inch chuck key to lock the bit in place. In addition, its rack and pinion allow for simple and quick fence adjustments.
The Powermatic 701 PM Benchtop Deluxe Mortiser
has a 5 Year warranty
-
In-line depth stop allows stopping at pre-set depths without racking the bit to the base
-
Heavy-duty reversible handle can be installed to either side of the head without tools
-
Stock hold-down with a double lock system, top and side, to eliminate slippage of workpiece
-
Quick action cam lock will quickly lock fence in position with one 90ð movement
-
2 integrated bit and chisel spacers for quick set up
-
Large work surfaces on both table and fence for greater stability and accuracy
-
Large, hinged chuck door with magnetic catch for rapid access to the chuck
-
Rack and pinion design for simple fence adjustments
-
Standard Equipment:
-
Integrated chisel and tool holder with sharpening stone
-
1/2 inch drill chuck with 4 inch chuck key
-
Removable safety switch key
|
Detailed Specifications
|
|
Base Size
|
16 5/16 x 13 3/4 inch
|
|
Brand
|
Powermatic
|
|
Bushing Size
|
5/8, 3/4 inch
|
|
Chisel Capacity
|
n.a.
|
|
Chisel Center to Fence
|
4 3/8 inch
|
|
Chisel Shank Capacity
|
3/4 inch
|
|
Chuck Size
|
1/2 inch
|
|
Fence Size (L x H)
|
2 5/8 x 12 1/2 inch
|
|
Head Stroke
|
5-1/2 inch
|
|
Height
|
17.4 inch
|
|
Length
|
24.2 inch
|
|
Model Number
|
PM701
|
|
Motor Current
|
8 / 4 A
|
|
Motor Phase
|
1 Ph
|
|
Motor Power
|
3/4 HP
|
|
Motor Voltage
|
115 / 230 V
|
|
Net Weight
|
93 pound
|
|
Overall Dimensions
|
24.2 x 19.2 x 17.4
|
|
Part Number
|
1791310
|
|
Prewired Voltage
|
115 V
|
|
Spindle Speed
|
1725 RPM
|
|
Spindle Taper
|
n.a.
|
|
Table Size (L x W)
|
11 x 13 inch
|
|
Table Tilt
|
n.a.
|
|
Under Hold-Down
|
5 inch
|
|
Width
|
19.2 inch
|
Download PDF of the manual
The 719T Tilt Table Mortiser features heavy-duty cast iron construction and a powerful 1HP motor for the most demanding jobs. The head is mounted using adjustable
gibs to assure years of trouble-free service. The heavy rack and pinion gear system utilizes a spring-loaded six position adjustable handle for movement. A handy depth stop gives a uniform depth
of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any angle between 0 and 35 degree. The table can also move left to right and forward and back on dovetail
ways with the large handwheel controls. Adjustable linear stops and flip down stop allow for precision repeatability. The quick adjust clamp provides plenty of work-holding force and will swivel
to accommodate angled workpieces. The heavy enclosed steel cabinet provides plenty of storage inside for chisels and accessories.
STANDARD EQUIPMENT
-
1HP motor
-
Work stop for repeat cut
-
Depth and length stops
-
Enclosed stand with shelf
-
Gas spring assists head travel for smooth movement
-
Quick-release vise for speedy release of work material
-
6 position feed lever
-
Sturdy cast iron construction with precision-machined column and table
-
Quick position table mounted swiveling vise clamp accommodates angled work pieces
-
Feed lever features size positions allowing for quick adjustments
-
Table and fence tilt from 0 to 35 degrees for angled mortises
-
Gas cylinder controlled rack and pinion system for smooth head raising and lowering
-
Hinged chuck door allows easy access for quick bit changes
-
Quick adjust depth stop for uniform mortise depths
-
Provided 5/8, 3/4 and 1-1/8 inch bushings allow multiple chisel shank sizes
-
Handwheels control smooth linear and cross table motions
-
Adjustable work stop for repeat cuts
|
Part Number
|
1791264K
|
|
Spindle Speed
|
1725 RPM
|
|
Chuck Size
|
1/2 inch
|
|
Chisel Capacity
|
1/4 - 1 inch
|
|
Chisel Shank Capacity
|
5/8, 3/4, 1 1/8 inch
|
|
Head Stroke
|
6 inch
|
|
Chisel Center to Fence
|
4 inch
|
|
Fence Size (L x H)
|
4 1/2 x 20 1/4 inch
|
|
Base Size
|
14 x 16 inch
|
|
Base Overall Height
|
60 inch
|
|
Bushing Size
|
5/8, 3/4, 1 1/8 inch
|
|
Table Size (L x W)
|
7 x 20 1/4 inch
|
|
Table Tilt
|
0 to 35 degree
|
|
Table Travel - Longitudinal
|
15 1/2 inch
|
|
Table Travel - Cross
|
4 inch
|
|
Motor Power
|
1 HP
|
|
Motor Voltage
|
115 / 230 V
|
|
Prewired Voltage
|
115 V
|
|
Motor Phase
|
1 Ph
|
|
Motor Current
|
11 / 5.5 A
|
|
Spindle Taper
|
n.a.
|
|
Chisel Stroke
|
10.75 inch
|
|
Model Number
|
719T
|
|
Brand
|
Powermatic
|
|
Overall Dimensions
|
21-1/4 x 21-5/8 x 74
|
|
Height
|
74 inch
|
|
Width
|
21.625 inch
|
|
Length
|
21.25 inch
|
|
Net Weight
|
276 pound
|
