FXA50A4 2 in head, 13.1 ft hose, 33 ft cord, 180 Hz
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air
pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95 percent of their power
under load.
-
Powered by a 4.5-amp electric motor
-
Permanently lubricated oversized head bearings for unmatched durability
-
Hose can be extended to 45 feet (13.5 meters)
-
Waterproof control box
-
Optional 50- and 100-foot (15, 30 meters) extension cords available
-
Requires high-cycle generator GDP5H
Notice: Features and equipment specifications are subject to change without notice.
FXA50A6 2 in head, 20 ft hose, 33 ft cord, 180 Hz
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air
pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95 percent of their power
under load.
-
Powered by a 2-amp electric motor
-
Permanently lubricated oversized head bearings for unmatched durability
-
Hose can be extended to 45 feet (13.5 meters)
-
Waterproof control box
-
Optional 50- and 100-foot (15, 30 meters) extension cords available
-
Requires high-cycle generator GDP5H
Notice: Features and equipment specifications are subject to change without notice.
FXA60A4
2.375 inch head, 13.1 ft hose, 33 ft cord, 180 Hz cycle
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air
pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95 percent of their power
under load.
-
Powered by a 4.5-amp electric motor
-
Permanently lubricated oversized head bearings for unmatched durability
-
Hose can be extended to 45 (13.5 meters)
-
Waterproof control box
-
Optional 50- and 100-foot (15, 30 meters) extension cords available
-
Requires high-cycle generator GDP5H
Notice: Features and equipment specifications are subject to change without notice.
FXA60A6
2.375 in head, 20 ft hose, 33 ft cord, 180 Hz,
High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air
pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95 percent of their power
under load.
-
Powered by a 4.5-amp electric motor
-
Permanently lubricated oversized head bearings for unmatched durability
-
Hose can be extended to 45 feet (13.5 meters)
-
Waterproof control box
-
Optional 50- and 100-foot (15, 30 meters) extension cords available
-
Requires high-cycle generator GDP5H
Notice: Features and equipment specifications are subject to change without notice.