MultiQuip Diesel-Powered Welder

Diesel-Powered Welder / Generators
Multiquips diesel powered welder/generators feature the smoothest arc characteristics in the indusrty producing more consistent and higher quality welds with trained operators. Simultaneous operation of the AC/DC output is possible on these slected models which range from 225 to 500 amps as welders and/or 3 to 14kW as generators

DLW300ESA1 300 amp Welder, 10.5KW, 120/240V, T4F Kubota Shown with optional trailer	DLW330X2 340 amp Welder, 10.5 KW, 120/240V, T4F Kubota	DLW400ESA4 400 amp Welder, 14kW, 120/240V, T4F Kubota Shown with optional trailer	DAW500SA4 500 amp Welder, 3KW, 120/240V Gen, T4F Kubota	DLW500ESA4 500 amp Welder, 14kW, 120/240V, T4F Isuzu

Gasoline-Powered Welder / Generators
For operators who need a welder/generator but don't anticipate extended use, Multiquip's gasoline-powered models are the first choice. They're productive and boast many of the features normally only found on much larger welder/generators.

GAW135H 135 Amps DC, 1.5 KW/120V AC, Honda GX200	GAW180HEA 180 Amps DC, 3KW/120V AC, Honda GX340

models
DLW300ESA1
DLW330X2
DLW400ESA4
DAW500SA4
DLW500ESA4
GAW135H
GAW180HEA

Diesel Powered Welder-Generators
DLW300ESA1	300 amp Welder, 10.5KW, 120/240V, T4F Kubota
DLW330X2	340 amp Welder, 10.5 KW, 120/240V, T4F Kubota
DLW400ESA4	400 amp Welder, 14kW, 120/240V, T4F Kubota
DAW500SA4	500 amp Welder, 3KW, 120/240V Gen, T4F Kubota
DLW500ESA4	500 amp Welder, 14kW, 120/240V, T4F Isuzu
Gasoline Powered Welder-Generators
GAW135H	135 Amps DC, 1.5 KW/120V AC, Honda GX200
GAW180HEA	180 Amps DC, 3KW/120V AC, Honda GX340

Accessories
TRLR10W	Single axle trailer (Light duty) for (DLW300ESA1 )
TRLRMP	Single axle trailer (Heavy duty) for (DLW300ESA1, DLW330X2, DLW400ESA4, DAW500SA4)
TRLRMPXF	Single axle trailer (Heavy duty) w/28 gallon fuel for (DLW300ESA1, DLW330X2, DLW400ESA4, DAW500SA4)
TRLR501XF	Single axle trailer (Heavy duty) w/40 gallon fuel for (DLW500ESA4)
TRLR502XF	Tandem axle trailer (Heavy duty) w/80 gallon fuel for (DLW500ESA4)
MQPSBTRLRMP	Trailer Tool box 3.5 cu.ft. (Fits MP/MPXF Model Trailer) for (DLW300ESA1, DLW330X2, DLW400ESA4, DAW500SA4)
MQPSBTRLR502	Trailer Tool box X.X cu.ft. for (DLW500ESA4)
MQPCCTRLR10	Cable Carrier (Fits 10W Model Trailer) Supports 200' welding cable for (DLW300ESA1)
MQPCCTRLRMP	Cable Carrier (Fits MP/MPXF Model Trailer) Supports 400' welding cable for (DLW300ESA1, DLW330X2, DLW400ESA4, DAW500SA4)
MQPCCTRLR502	Cable Carrier (Fits 501/502XF Model Trailers) Supports 400' welding cable for (DLW500ESA4)
DLWWRKIT300	Wire Remote Control for (DLW300ESA1)
DLWWRKIT400	Wire Remote Control for (DLW330X2, DLW400ESA4, )
DAWWRKIT500	Wire Remote Control for (DAW500SA4, DLW500ESA4)
MQPILHEATERKIT	Fuel Heater w/Filter for (DLW300ESA1, DLW330X2, DLW400ESA4)
MQPBCDAKIT	Battery Tender for (DLW300ESA1, DLW330X2, DLW400ESA4, DLW500ESA4)
HEATPADKIT	Block Heater (Pan Heater type) for (DLW300ESA1, DLW330X2, DLW400ESA4, DLW500ESA4)
UWKB	Wheel Kit for (GAW135H, GAW180HEA)

DLW300ESA1 300 amp Welder, 10.5KW, 120/240V, T4F Kubota

Click here to download parts list
Click here to download Generators Handbook
Click here to download Welders Brochure

DLW300ESA1
300 amp Welder, 10.5KW, 120/240V, T4F Kubota

The DLW300ESA1 welder/generator is a CC/CV output unit that delivers superior arc characterisitcs and consistent welding quality. Rated for 10.5kW, It is the quietest welder/generator in the industry with only 59 dBA at 23 feet. The E-mode feature improves fuel effciency by allowing the operator to weld at idle up to 160 amps, reducing operating costs and noise levels.

Delivers up to 300 amps as a welder with the convenience of 10.5 kW of AC power as a generator
Can draw simultaneous AC power while welding
Amazing voltage regulation at 1.5 percent (+/-)
Tier 4 final Kubota diesel - Model D722
Arc Force control allows the operator to fine tune DC current during low voltage welding conditions which helps in preventing electrodes froms sticking during short arc length welding
Smooth arc characteristics and more consistent, quality weld penetration
E-mode improves fuel efficiency by allowing one operator to weld up to 160 amps while the engine maintains idle speeds.
SMAW, FCAW, GMAW, GTAW and ACAC welding processes
Sound attenuated cabinet reduces noise output to 59 dBA at 23'
External fuild drains for easy maintenance
Full panel GFCI protection - OSHA and NEC compliant
Options - Wire remotes, welding cable, cable carriers, tool box, trailers, cold weather items are available for this model.

Specifications
DC Voltage	CC: 31 V	CV: 32 V
DC Current	CC: 300 A	CV: 300 A
Current Range	35-300 A
Max Duty Cycle w/ Full Amps Availible	100 percent at 280 A
Welding Processes	SMAW FCAW GMAW GTAW ACAC
Fuel Tank Capacity	9.5 gal	36 L
Fuel Consumption at Rated Load	0.66 gph

AC Power Output (Single Phase)	10.5 kW
Cycle	50/60 Hz
Voltage	120/240 V
Amperage	87/44 A
Voltage Regulation	1.5 percent
Receptacles	NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L6-30R 250V Twist-Lock 30A CS-6369 125/250VAC Twist-Lock 50A

Overall Length	50.8 in	1290 mm
Overall Width	26.77 in	680 mm
Overall Height	33.07 in	840 mm
Shipping Dimensions	50.78 x 26.77 x 33.07 in 1290 x 680 x 840 mm
Operating Weight	941 lb	427 kg
Shipping Weight	848 lb	385 kg

DLW330X2 340 amp Welder, 10.5 KW, 120/240V, T4F Kubota

Click here to download Generators Handbook
Click here to download Welders Brochure

DLW330X2
340 amp Welder, 10.5 KW, 120/240V, T4F Kubota

This CC (Constant Curent) and CV (Constant Voltage) welder delivers up to 340 amps during single operation, or 200 amps to both outputs during dual operation. As a generator, this unit provides up to 10.5 kW of clean, 120/240 AC power. A digital panel display provides both amperage/voltage and troubleshooting information to the operator(s). Smart Stick, E-Mode, Arc Force are just some of the features of the DLW330X2 from Multiquip.

Delivers up to 340 amps as a welder with the convenience of 10.5 kW of AC power as a generator
Dual operator output ability
Can draw simultaneous AC power while welding
Amazing voltage regulation at 1.5 percent (+/-)
Tier 4 final Kubota diesel - Model D902
Arc Force control allows the operator to fine tune DC current during low voltage welding conditions which helps in preventing electrodes froms sticking during short arc length welding
Smooth arc characteristics and more consistent, quality weld penetration
E-mode improves fuel efficiency by allowing one operator to weld up to 200 amps while the engine maintains idle speeds. Two operators can also use this feature when the total amperage between both outputs does not exceed 200 amps.
Smart Stick function automatically shuts the engine down during periods of no load. The operator only needs to tap the welding rod to the grounded work for the engine to restart, making restarts while in the rafters or hanging from the side of a skyscraper a breeze.
SMAW, FCAW, GMAW, GTAW and ACAC welding processes
Sound attenuated cabinet reduces noise output to 68 dBA at 23'
Full panel GFCI protection - OSHA and NEC compliant
Options - Wire remotes, welding cable, cable carriers, tool box, trailers and cold weather items are available for this model.

Specifications
DC Voltage	CC: Single 31.2V, Dual 26.6 V	CV: Single 28V, Dual 22.3 V
DC Current	CC: Single 280, Dual 165 A	CV: Single 280, Dual 165 A
Current Range	Single 70-340, Dual 35-200 A
Max Duty Cycle w/ Full Amps Availible	100 percent atSingle 280, Dual 165 A
Welding Processes	SMAW FCAW MGAW GTAW ACAC
Fuel Tank Capacity	9.5 gal	36 L
Fuel Consumption at Rated Load	1.1 gph

AC Power Output (Single Phase)	10.5 kW
Cycle	60 Hz
Voltage	120/240 V
Amperage	87.6/43.8 A
Voltage Regulation	1.5 percent
Receptacles	NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L6-30R 250V Twist-Lock 30A CS-6369 125/250VAC Twist-Lock 50A

Overall Length	50.78 in	1290 mm
Overall Width	26.77 in	680 mm
Overall Height	33.07 in	840 mm
Shipping Dimensions	50.78 x 26.77 x 33.07 in 1290 x 680 x 840 mm
Operating Weight	983 lb	446 kg
Shipping Weight	892.87 lb	405 kg

DLW400ESA4 400 amp Welder, 14kW, 120/240V, T4F Kubota

Click here to download Manual
Click here to download Data Sheet
Click here to download Generators Handbook
Click here to download Welders Brochure

DLW400ESA4
400 amp Welder, 14kW, 120/240V, T4F Kubota

This CC (constant current) and CV (constant voltage) welder delivers up to 400 amps during single operation, or 200 amps to both outputs during dual operation. As a generator, this unit provides up to 14 kW of clean, 120/240 AC power. A digital panel display provides both amperage/voltage and troubleshooting information to the operator(s). Smart Stick, E-Mode, Arc Force are just some of the features of the DLW400ESA4 from Multiquip.

Delivers up to 400 amps as a welder with the convenience of 14 kW of AC power as a generator
Dual operator output ability
Can draw simultaneous AC power while welding
Amazing voltage regulation at 1.5 percent (+/-)
Tier 4 final Kubota diesel - Model D902
Arc Force control allows the operator to fine tune DC current during low voltage welding conditions which helps in preventing electrodes froms sticking during short arc length welding
Smooth arc characteristics and more consistent, quality weld penetration
E-mode improves fuel efficiency by allowing one operator to weld up to 200 amps while the engine maintains idle speeds. Two operators can also use this feature when the total amperage between both outputs does not exceed 200 amps.
Smart Stick function automatically shuts the engine down during periods of no load. The operator only needs to tap the welding rod to the grounded work for the engine to restart, making restarts while in the rafters or hanging from the side of a skyscraper a breeze.
SMAW, FCAW, GMAW, GTAW and ACAC welding processes
Sound attenuated cabinet reduces noise output to 70 dBA at 23'
Full panel GFCI protection - OSHA and NEC compliant
Options - Wire remotes, welding cable, cable carriers, tool box, trailers and cold weather items are available for this model.

Specifications
DC Voltage	CC: Single 34V, Dual 27V V	CV: Single 35V, Dual 28V V
DC Current	CC: Single 400, Dual 200 A	CV: Single 400, Dual 200 A
Current Range	Single 30-400, Dual 30-200 A
Max Duty Cycle w/ Full Amps Availible	100 percent at Single 350, Dual 175 A
Welding Processes	SMAW FCAW GMAW GTAW ACAC
Fuel Tank Capacity	11.1 gal	42 L
Fuel Consumption at Rated Load	1.3 gph

AC Power Output (Single Phase)	14 kW
Cycle	60 Hz
Voltage	120/240 V
Amperage	116/58 A
Voltage Regulation	1.5 percent
Receptacles	NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L6-30R 250V Twist-Lock 30A CS-6369 125/250VAC Twist-Lock 50A

Overall Length	61 in	1550 mm
Overall Width	29 in	737 mm
Overall Height	35 in	890 mm
Shipping Dimensions	63 x 30 x 41 in 1600 x 762 x 1041 mm
Operating Weight	1144 lb	519 kg
Shipping Weight	1027 lb	466 kg

DAW500SA4 500 amp Welder, 3KW, 120/240V Gen, T4F Kubota

Click here to download parts list
Click here to download Generators Handbook
Click here to download Welders Brochure

DAW500SA4
500 amp Welder, 3KW, 120/240V Gen, T4F Kubota

The DAW500SA4 is a powerhouse for CC (constant current) and CV (constant voltage) welding applications. Delivering up to 500 amps during operation. As a generator, this unit provides up to 3 kW of clean, 120/240 AC power. This model is ideal for very large projects that demand high current for penetration when welding or for carbon cutting. Equipped with Kubota's Tier 4 final D1803 which provides long service life, making this unit a perfect choice for professional welder.

500 amp DC output & 3 kW AC
CC and CV welding capabilities
Voltage regulation is maintained at Â±10 percent
Showcases a clean burning Tier 4 final EPA-approved Kubota diesel engine
Electric-start, Lifting bail, external oil/fuel drains come as standard features
SMAW, FCAW, GMAW, GTAW and ACAC welding processes
Sound attenuated cabinet reduces noise output to 74 dBA at 23'
Full panel GFCI protection - OSHA and NEC compliant
Options - Wire remotes, welding cable, cable carriers, tool box and trailers are available for this model.

Specifications
DC Voltage	CC: 38 V	CV: 16-40 V
DC Current	CC: 500 A	CV: 500 A
Current Range	40-500 A
Max Duty Cycle w/ Full Amps Availible	100 percent at 350 A
Welding Processes	SMAW FCAW GMAW GTAW ACAC
Fuel Tank Capacity	12 gal	0 L
Fuel Consumption at Rated Load	1.3 gph

AC Power Output (Single Phase)	3 kW
Cycle	50/60 Hz
Voltage	120 V
Amperage	25 A
Voltage Regulation	7 percent
Receptacles	NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A

Overall Length	52 in	1330 mm
Overall Width	31.49 in	800 mm
Overall Height	44.48 in	1130 mm
Shipping Dimensions	52 x 31.49 x 44.48 in 1330 x 800 x 1130 mm
Operating Weight	1302 lb	591 kg
Shipping Weight	1175 lb	533 kg

DLW500ESA4 500 amp Welder, 14kW, 120/240V, T4F Isuzu

Click here to download parts list
Click here to download Generators Handbook
Click here to download Welders Brochure

DLW500ESA4
500 amp Welder, 14kW, 120/240V, T4F Isuzu

This CC (constant current) and CV (constant voltage) welder delivers up to 500 amps during single operation, or 250 amps to both outputs during dual operation. As a generator, this unit provides up to 14 kW of clean, 120/240 AC power. A digital panel display provides both amperage/voltage and troubleshooting information to the operator(s). Smart Stick, E-Mode, Arc Force, 14 Pin interfacing connections are just some of the features of the DLW500ESA4 from Multiquip.

Delivers up to 500 amps as a welder with the convenience of 14 kW of AC power as a generator
Dual operator output ability
Can draw simultaneous AC power while welding
Amazing voltage regulation at 1.5 percent (+/-)
Tier 4 final Isuzu diesel - Model 4LE2T
Arc Force control allows the operator to fine tune DC current during low voltage welding conditions which helps in preventing electrodes froms sticking during short arc length welding
Smooth arc characteristics and more consistent, quality weld penetration
E-mode improves fuel efficiency by allowing one operator to weld up to 280 amps while the engine maintains idle speeds. Two operators can also use this feature when the total amperage between both outputs does not exceed 180 amps.
Smart Stick function automatically shuts the engine down during periods of no load. The operator only needs to tap the welding rod to the grounded work for the engine to restart, making restarts while in the rafters or hanging from the side of a skyscraper a breeze.
SMAW, FCAW, GMAW, GTAW and ACAC welding processes
Sound attenuated cabinet reduces noise output to 65 dBA at 23'
Full panel GFCI protection - OSHA and NEC compliant
Options - Wire remotes, welding cable, cable carriers, tool box, trailers and cold weather items are available for this model.

Specifications
DC Voltage	CC: Single 38V, Dual 30V V	CV: Single 36.5V, Dual 26.5V V
DC Current	CC: Single 450, Dual 250 A	CV: Single 450, Dual 250 A
Current Range	Single 30-500, Dual 30-280 A
Max Duty Cycle w/ Full Amps Availible	100 percent at Single 450, Dual 180 A
Welding Processes	SMAW FCAW GMAW GTAW ACAC
Fuel Tank Capacity	17.7 gal	67 L
Fuel Consumption at Rated Load	1.59 gph

AC Power Output (Single Phase)	14 kW
Cycle	60 Hz
Voltage	120/240 V
Amperage	58.3 x2 / 58.3 A
Voltage Regulation	1.5 percent
Receptacles	NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L6-30R 250V Twist-Lock 30A CS-6369 125/250VAC Twist-Lock 50A

Overall Length	80 in	2035 mm
Overall Width	33 in	830 mm
Overall Height	45 in	1130 mm
Shipping Dimensions	80 x 33 x 45 in 2035 x 830 x 1130 mm
Operating Weight	2148 lb	975 kg
Shipping Weight	1960 lb	890 kg

Gross Vehicle Weight Rating (GVWR)	6,000 lb	2,722 kg
Gross Axle Weight Rating (GAWR) (ea.)	3,500 each lb	1,588 kg
Coupler Rating	3 in. Pintle Eye - 20,000 lb (9,072 kg); 2 in. Ball Coupler - 6,000 lb (2,722 kg); 2-5/16 in. Ball Coupler - 14,000 lb (6,350 kg)
Tire Size	ST205/75D14 LR-C
Tire Load Rating (ea.)	1,760 lb	657 kg
Wheel Bolt Pattern	5 Lug on 4.5 in
Fuel Tank Capacity	80 gal	303 L
Fits MQ Power Generator Models	DLW500ESA4

Overall Length	152.99 in	3,885.95 mm
Overall Width	45.25 in	1,149 mm
Overall Height	24.98 in	634.5 mm
Operating Weight
With Fuel	1,593 lb	723 kg
Without Fuel	1,025 lb	465 kg

GAW135H 135 Amps DC, 1.5 KW/120V AC, Honda GX200

Click here to download Parts Manual
Click here to download Generators Handbook
Click here to download Welders Brochure

GAW135H
135 Amps DC, 1.5 KW/120V AC, Honda GX200

Coming in at only 114 pounds, Multiquip's 135-amp welder is the number one choice for those hard to reach areas with its maintenance free permanent magnet generator design. This unit maintains the quality output contractors demand and have come to expect.

135 amps of DC welding power, 1.5kW AC output
Dry weight of only 114 pounds (52 kg)
Honda GX200 gasoline engine
Up to 45 percent lighter than other welders in its class
Can be mounted to service trucks or on high reach baskets
Ideal for a wide variety of utility welding applications

Specifications
DC Voltage	CC: 25.2 V	CV: n/a V
DC Current	CC: 135 A	CV: n/a A
Current Range	40-135 A
Max Duty Cycle w/ Full Amps Availible	40 percent at 135 A
Welding Processes	SMAW FCAW
Fuel Tank Capacity	1.6 gal	7.3 L
Fuel Consumption at Rated Load	0.46 gp

AC Power Output (Single Phase)	1.5 kW
Cycle	60 Hz
Voltage	120 V
Amperage	12.5 A
Voltage Regulation	3 percent
Receptacles	NEMA 5-20R 125V GFCI 20A

Overall Length	21.75 in	55.25 mm
Overall Width	17.75 in	45.1 mm
Overall Height	19 in	48.26 mm
Shipping Dimensions	22.5 x 19 x 20.5 in 57.2 x 48.25 x 52 mm
Operating Weight	123 lb	55.7 kg
Shipping Weight	114 lb	51.7 kg

Engine Make/Model	Honda GX-200
Start Method	Recoil
Engine Power	5.5 HP	4.1 kW
Engine RPM	3600
Fuel Type	Gasoline

GAW180HEA 180 Amps DC, 3KW/120V AC, Honda GX340

Click here to download Manual
Click here to download Generators Handbook
Click here to download Welders Brochure

GAW180HEA
180 Amps DC, 3KW/120V AC, Honda GX340

Multiquip's gas powered 180-amp welder leads the industry in its class with the compact permanent magnet generator design which lightens the weight of the unit while the Inverter technology maintain the quality output contractors demand.

Inverter technology improves sine-wave control resulting in cleaner AC/DC output.
Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes froms sticking during short arc length welding.
Ideal for job site and remote-area service applications
Produces 50-180 amps for DC welding, 3kW output to power AC tools.
Operator can draw AC power and weld simultaneously
Honda GX340 gasoline engine
Maintenance free Permanent magnet alternator-significantly reduces overall weight compared to the competition
Full panel GFCI protection - OSHA and NEC compliant

Specifications
DC Voltage	CC: 26.8 V	CV: n/a V
DC Current	CC: 180 A	CV: n/a A
Current Range	50-180 A
Max Duty Cycle w/ Full Amps Availible	50 percent at 180 A
Welding Processes	SMAW FCAW GMAW
Fuel Tank Capacity	3.7 gal	16.8 L
Fuel Consumption at Rated Load	0.93 gph

AC Power Output (Single Phase)	3 kW
Cycle	60 Hz
Voltage	120 V
Amperage	25 A
Voltage Regulation	3 percent
Receptacles

Overall Length	27.5 in	698.5 mm
Overall Width	22 in	558.8 mm
Overall Height	23.8 in	604.52 mm
Shipping Dimensions	28.5 x 23 x 28 in 72.4 x 58.4 x 71.1 mm
Operating Weight	246 lb	111.5 kg
Shipping Weight	224 lb	101.6 kg

Engine Make/Model	Honda GX-340
Start Method	Electric/Recoil
Engine Power	10.7 HP	8.0 kW
Engine RPM	3600
Fuel Type	Gasoline

MultiQuip Diesel-Powered Welder - Generators