Oliver Shapers

models
10047
10047VS
4705

Shapers
10047.001	Shaper 3HP 1Ph
10047.002	Shaper 5HP 1Ph
10047VS.001	Variable Speed Shaper 3HP 1Ph
4705.001	Shaper 5HP 1Ph
4705.002	Shaper 7.5HP 3Ph
Shaper Accessories
10047.A001	1/2 inch Spindle for 4705 and 10047 Shaper
10047.A002	3/4 inch Spindle for 4705 and 10047 Shaper
10047.A003	1 inch Spindle for 10047 Shaper
10047.A006	1-1/4 inch Spindle for 10047 Shaper
4705.A001	1 inch Spindle for 4705 Shaper
4705.A004	1-1/4 inch Spindle for 4705 Shaper
4705.A002	1/4 inch Collet for 4705 and 10047 Shaper
4705.A003	1/2 inch Collet for 4705 and 10047 Shaper

Click here to download manual

Features:

Large cast iron table precision ground table provides a solid work surface.
Full cabinet stand includes wheel and locks.
1-1/4 inch interchangeable spindle included, other sizes available.
Optional router bit collets available.
Four spindle speeds for versatility
Belt changes are quick and convienent with unique tensioner.
Poly V-belt drive for smoother operation.
Spindle reverses for more options with each set-up.
Four inches of spindle travel allows more set-up options.
Starting pin for irregular shapes included.
Fence is independent and includes micro adjustments.
Adjustable hold downs add to a safer operation.
Extra large handwheel for easy and quick height adjustment.
Mitre guage included.
Magnetic controls for added safety.
Powerful TEFC motor in 3HP or 5HP to meet your needs.

Specifications 10047
Model No.	10047
Stock No. (5HP, 1Ph)	10047.001
Stock No. (7.5HP, 3Ph)	10047.002
Spindle Speed (RPM)	4,000 / 6,000 / 8,000 / 10,000
Spindle Diameter (included)	1-1/4 inch
Spindle Travel	4 inch
Spindle Direction	Reversible
Under Nut Capacity	4 inch with 1-1/4 inch spindle
Table Opening	6-1/4 inch
Large Insert Opening	4-5/16 inch
Small Insert Opening	2-1/2 inch
Table Height	34 inch
Table Size	32 x 26 inch
T-Slot Size	3/4 x 3/8 inch
Fence Size (2)	4-13/16 x 16 inch
Dust Port	4 inch
Minimum CFM Required	800
Motor 10047.001	3HP 1Ph 230V Only
Motor 10047.002	5HP 1Ph 230V Only
Net Weight	455 lbs.
Optional Accessories (Additional Cost)	1/2 inch Spindle, 3/4 inch Spindle, 1 inch Spindle, 1/4 inch Collet, 1/2 inch Collet,

Click here to download manual

Features:

Variable Frequency Drive provides 5,000 to 10,000 Spindle RPM.
Elevated control panel with DRO, emergency stop, and speed control.
DRO measures spindle RPM and spindle height.
Large cast iron table is precision ground to provide a solid work surface.
Table features pre-drilled and threaded holes for optional power feeder.
Full cabinet stand includes wheels and locks.
1-1/4 inch interchangeable spindle included, other optional sizes available.
Optional router bit collets available.
Poly V-belt drive for smoother operation.
Spindle reverses for more options with each set-up.
Four inches of spindle travel allows more set-up options.
Starting pin for irregular shapes included.
Fence is independent and includes micro adjustment.
Adjustable hold downs add to a safer operation.
Extra large handwheel for easy and quick height adjustment.
Miter gauge included.
Powerful TEFC motor to meet your needs.

Specifications 10047VS
Model Number	10047VS
Stock No. (3HP, 1Ph)	10047VS.001
Spindle Speeds	5,000 to 10,000 RPM
Spindle Diameter:	1-1/4 inch
Verticle Spindle Travel:	4 inch
Spindle Direction:	Reversible
Under Nut Capacity:	4 inch with 1-1/4 inch Spindle
Table Opening:	6-1/4 inch
Large Insert Opening:	4-5/16 inch
Small Insert Opening:	2-1/2 inch
Table Height	34-3/8 inch
Table Size	32 x 26 inch
T-Slot:	3/4 x 3/8 inch
Fence Size (2):	4-13/16 x 16 inch
Dust Port Diameter	4 inch
Minimum CFM:	800
Motor 1Ph	3HP, 220V only (8 Amp)
Net Weight	396 lbs.
Gross Weight	511 lbs.

Click here to download manual

The Oliver 4705 Shaper uses an interchangeable quill assembly capable of handling 3/4 or 1-1/4 inch spindles. With a 4 inch spindle travel and cutter diameters up to 8 inch no job is out of the question. A newly designed dovetail system for the spindle height adjustment ensures both accuracy and longevity with minimal maintenance. With the skilled woodworker in mind, Oliver put a lot of thought into its fence design. With accurately scaled micro-adjusts for the right and left fences and integral feather board hold downs the operator is sure to be pleased.

Features:

Massive cast iron precision ground table provides a solid work surface.
Cast iron base provides a steady platform.
3/4 and 1-1/4 inch interchangeable spindles are included for added versatility.
Three spindle speeds allow more choices to produce a better finish.
Reversing spindle gives more options for each set-up.
Innovative dovetail design accurately raises and lowers the spindle.
Fence is independent and features micro adjustments for quick set-up.
Top mounted control panel includes a digital readout for spindle height.
Large hand wheel for quick spindle height adjustment.
Magnetic controls with emergency off switch for safer operation.
Powerful TEFC motor available in single or three-phase.
Includes miter gauge.
Optional collet for router bits available special order.
Optional 440/460 volt available special order only. Additional cost/parts may apply.

Specifications 4705
Model No.	4705
Stock No. (5HP, 1Ph)	4705.001
Stock No. (7.5HP, 3Ph)	4705.002
Table Dimensions	39-1/4 inch x 31-1/2 inch
Table Height	36-1/2 inch
Vertical Spindle Travel	4 inch
Spindle Direction	Reversible
Spindle Speed	5,000, 7,000, 10,000 RPM
Maximum Tool Diameter	7 inch Below Table, 8 inch Above Table
Spindle Diameter	1-1/4 and 3/4 inch Interchangable
Dust Collector Port	4 inch
Minimum CFM Required	800
Motor (1Ph)	5HP, 220V only
Motor (3Ph)	7.5HP, 220/440V, Prewired 220V Optional 440/460 volt available special order only. Additional cost/parts may apply.
Shipping Dimensions (L x W x H/in.)	39 x 31 x 45 inch
Net Weight	780 lbs.
Gross Weight (lbs.)	870 lbs


Oliver 10047 Shaper	Oliver 10047VS Variable Speed Shaper	Oliver 4705 Shaper