Safety Speed Cut Saw Router Combination Machines

SR5 Panel Saw and Router Combo

Cutting and routing full sized panels is often a job that’s dreaded in the shop due to effort required or fear of getting too close to exposed tooling. The SR5 Saw and Router combination machine features a heavily guarded blade and can be changed from a saw to a router in under a minute, all while delivering an accuracy of 1/64” straight and square. The SR5 and is ideal for shops doing extensive cutting, and dado or rabbet routing. The interchangeable motor carriage features a rotating saw and router for sizing panels by pushing the panel through and making a ripcut, or by letting gravity take control and pushing the saw or router down for making a vertical crosscut. The patented self-adjusting, floating router carriage provides a consistent depth of cut. Our MID-WAY Fence® allows for processing smaller panels at waist level. If both panel cutting and routing are part of your operation, why not consider one machine that will do both?

Note that you can use either 1/4 inch or 1/2 inch collet router bits for the router. These router bits can be found at your hardware store of choice.

For shops with limited space, this versatile machine is ideal where both panel sizing and panel routing are required. Ask about our V-grooving package.

Standard Equipment 

• 3 1/4 Hp, 15 amp Milwaukee Tool saw motor.
• 1 3/4 Hp, 11 amp Milwaukee Tool router motor.
• 10 ft. welded steel frame.
• Chrome-plated 1 3/4 inch guide tubes.
• 8 Nylatron roller bearing system.
• Adjustable vertical and horizontal rulers.
• Quick change from vertical to horizontal cutting.
• Enclosed counterweight system.
• Integrated dust collection bonnet.
• Thin material pressure guard.
• Injection molded plastic rollers
• Adjustable floating router head.
• MID-WAY FENCE with stop.
• MID-WAY FENCE flip stop.
• 4 material clamps.
• 2 blind dado stops.
• Extended warranty.
• TUV certified to UL/CSA standards.

SR5A ACM Panel Saw and Router Combo

The SR5A is a fully accessorized machine including the following components that are considered accessories on our other offerings:

Routing capabilities include making plow and cross dados as well as rabbet’s. Routing features include a floating router head allowing the router to plunge into, and raise out of the panel at any time. Additionally routing accessories include four clamps, and blind dado stops.

The unique design of this unit allows for accurate cutting and V-Grooving of ACM (Aluminum Composite Material) panels. Features a unique floating router with a nylon guide guaranteeing a consistent depth of cut. The saw can also be switched over to a router in less than one minute. It also features a dust system in place to collect debris while cutting and routing.

Features:

• 3 1/4 Hp, 15 amp industrial duty saw motor.
• 1 3/4 Hp, 11 amp industrial duty router motor.
• 10 ft. Welded steel frame.
• Chrome plated 1 3/4 inch guide tubes.
• 8 Nylatron roller bearing systems.
• Adjustable vertical and horizontal rulers.
• Quick change from vertical and horizontal cutting.
• Thin material pressure guard.
• Injection molded plastic material rollers.
• Counterweight system.
• Adjustable floating router head.
• MID-WAY FENCE with stop.
• 4 material clamps.
• 2 blind dado stops.
• Wheels.
• Fixed Stand.
• Extensions.
• Left and right quick stop gauges.
• MID-WAY FENCE flip stop.
• Dust hood and hose kit.
• Hold down bar.
• Specialty saw blade and router bit for v-grooving
• 1 year parts warranty.

SR5U Panel Saw and Router Combo

SR5UA ACM Panel Saw and Router Combo

The unique design of this unit allows for accurate cutting and V-Grooving of ACM (Aluminum Composite Material) panels. Features a unique floating router with a nylon guide guaranteeing a consistent depth of cut. The saw can also be switched over to a router in less than one minute. It also features a dust system in place to collect debris while cutting and routing.

Standard Equipment 

• 3 Hp worm drive saw motor.
• 3-1/4 inch Hp heavy-duty router motor.
• 10 ft. Welded steel frame.
• Chrome plated 1-3/4 inch guide tubes.
• 8 Nylatron roller bearing systems.
• Adjustable vertical and horizontal rulers.
• Quick change from vertical and horizontal cutting.
• Thin material pressure guard.
• Solid aluminum material rollers.
• Counterweight system.
• Adjustable floating router head.
• MID-WAY FENCE with stop.
• 4 material clamps.
• 2 blind dado stops.
• Wheels.
• Fixed Stand.
• Extensions.
• Left and right quick stop gauges.
• MID-WAY FENCE flip stop.
• Dust hood and hose kit.
• Hold down bar.
• Specialty saw blade and router bit for v-grooving
• 1 year parts warranty.