|
Overview
Sand two grits in a single pass with a 37Ã2 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP motor, you can significantly reduce the amount of time you spend
sanding.
The 37Ã2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an
open-column base, and features a 5 HP motor. Available in Single and 3 Phase power.
Features:
-
INTELLISAND Technology: Automatically adjusts conveyor speed based on load
- Prevents gouging, damaging or burning stock
- Provides consistent finish even with varying grain pattern and density
- Greatly increases abrasive planing and dimensioning speed
-
Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no flex in conveyor, guaranteeing flatness to less than .010
inch across the width of the sander
-
Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
-
Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
-
Easiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools.
-
Self-cooling drum prevents overheating and extends abrasive life
|
What is the difference between your drum sanders and other brands?
Intellisand automatically adjust feed speed to help prevent burning of stock. They also increase abrasive life and prevent damaging sander if over fed, set too deep or stock is thicker in middle or
end. All SuperMax sander have infinitely adjustable conveyor feed rates for precise settings. All SuperMax sanders use a self-cooling drum which effectively dissipates heat from sanding, thus
extending abrasive life, reducing the chance of burning and prevents over-heating and warping of the drum. All SuperMax drum sanders are precision engineered for long life. All SuperMax sanders use
a computer balanced drum(s) and drive train components to prevent ripple on the surface of stock being processed and to extend life of bearings and other parts. All SuperMax drum sanders use an
exclusive abrasive conveyor belt which offers the best grip and no-give grip to stock being sanded. All SuperMax drum sanders use a patented self-tightening abrasive attachment system, making the
common task of changing abrasives fast, simple and tool free.
|
Sanding Capacity:
|
Maximum Width (in): 25, 37 Minimum Length (in): 3-1/2 Maximum Thickness (in): 25 inch model: 6 37 inch models: 12 Minimum Thickness (in): 1/32
|
|
Dimensions HxWxD (in):
|
25 inch model: 43 x 46 x 31 37 inch model: 43 x 58 x 31
|
|
Drum (in): (extruded aluminum)
|
25 inch model: 5 x 25 37 inch model: 5 x 37
|
|
Drum speed:
|
1740 RPM
|
|
Dust Hood: (Steel hood, hinged at back
|
25 inch model: one (2) 4 inch vacuum port, min. 1000 CFM recommended 37 inch model: (3) - 4 inch vacuum ports, min. 1800 CFM recommended
|
|
Ball bearings (1â):
|
4, sealed and permanently lubricated
|
|
Conveyor Motor:
|
25 inch and 37 inch models: 100 in. -lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM 50 ich model: 220 in.-lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM
|
|
Drive Motor (TEFC):
|
25 inch and 37 inch models: 5 HP
|
|
Power Requirements:
|
208-230V, 60HZ; 1 Ph, 30 amp service; 3 Ph 20 amp service
|
|
Shipping Weight (lbs):
|
25 inch model: 475 37 inch model: 525
|
